1.0.0

AYAB version 1.0.0 is the new stable AYAB release.

Thanks to everyone who helped make it a reality.

Please check What's new in AYAB 1.0 for information on what changed since AYAB 0.95.

Installation instructions for all supported operating systems can be found in the manual.

Please note that this release includes an updated firmware. Make sure to use the Tools > Load AYAB firmware menu item after installing.

1.0.0-beta5

Updated beta release for the upcoming AYAB version 1.0.0.

If you want to participate in the beta test programme, it helps us if you sign up via this Google form.
Thanks a lot!

Please check What's new in AYAB 1.0 for information on what changed since AYAB 0.95.

Installation instructions for all supported operating systems can be found in the manual (skip the part where it says to download from https://ayab-knitting.com/ayab-software/ and download the appropriate package from below instead).

Please note that this release includes an updated firmware. Make sure to use the Tools > Load AYAB firmware menu item after installing.

Changes from 1.0.0-beta4

Fixed:

• Extra needles selected when knitting lace (#40)
• Starting from the right of the machine (AllYarnsAreBeautiful/ayab-firmware#175, AllYarnsAreBeautiful/ayab-firmware#176, AllYarnsAreBeautiful/ayab-firmware#216)
• KH270: mispatterning on the leftmost needles (AllYarnsAreBeautiful/ayab-firmware#215)
• Missing German translations

Added:

• Chinese translations
• Japanese translations

Full Changelog: 1.0.0-beta4...1.0.0-beta5

1.0.0-beta4

Updated beta release for the upcoming AYAB version 1.0.0.

If you want to participate in the beta test programme, it helps us if you sign up via this Google form.
Thanks a lot!

Please check What's new in AYAB 1.0 for information on what changed since AYAB 0.95.

Installation instructions for all supported operating systems can be found in the manual.

Changes from 1.0.0-beta3

This release uses the same firmware as 1.0.0-beta3.

Fixed:

• Patterning can get stuck on row n-1 and never finish (#662)
• Incorrect sounds/display at the end of a single repeat (#617)
• Left and Right alignment are adding the extra whitespace on the wrong side (#734)
• Lower display is blank with edges wider than image (#733)
• Opening a new image does not reset the Left and Right settings (#732)
• Simulation claims to be showing a Lace carriage (#692)

Known issues

This lists only issues that will definitely be fixed in 1.0:

• Starting from the right only works on KH910/KH950, and only when using main (K) carriage. Support for other hardware is being worked on (AllYarnsAreBeautiful/ayab-firmware#175, AllYarnsAreBeautiful/ayab-firmware#176, AllYarnsAreBeautiful/ayab-firmware#216).
• Extra needles selected when knitting lace (AllYarnsAreBeautiful/ayab-firmware#40)
• KH270, right-left rows always select needles Left 53-56 to D (AllYarnsAreBeautiful/ayab-firmware#215)

Full Changelog: 1.0.0-beta3...1.0.0-beta4

1.0.0-beta3

Updated beta release for the upcoming AYAB version 1.0.0.

If you want to participate in the beta test programme, it helps us if you sign up via this Google form.
Thanks a lot!

Please check What's new in AYAB 1.0 for information on what changed since AYAB 0.95.

Installation instructions for all supported operating systems can be found in the manual.

Changes from 1.0.0-beta2

This release comes with a new firmware, make sure to run Tools > Load AYAB Firmware before knitting!

Fixed:

• On Windows, the Beta2 release build crashes on launch. (#720)
• Needle selection is wrong on KH270, Beta builds. (AllYarnsAreBeautiful/ayab-firmware#204)
• Incorrect needle selection on 270, after starting AYAB with the carriage to the right of the left hall sensor. (#667)

Known issues

This lists only issues that will definitely be fixed in 1.0:

• Starting from the right only works on KH910/KH950, and only when using main (K) carriage. Support for other hardware is being worked on (AllYarnsAreBeautiful/ayab-firmware#175, AllYarnsAreBeautiful/ayab-firmware#176, AllYarnsAreBeautiful/ayab-firmware#216).
• Patterning can get stuck on row n-1 and never finish (#662)
• Incorrect sounds/display at the end of a single repeat (#617)
• Left and Right alignment are adding the extra whitespace on the wrong side (#734)
• Lower display is blank with edges wider than image (#733)
• Opening a new image does not reset the Left and Right settings (#732)
• Simulation claims to be showing a Lace carriage (#692)
• Extra needles selected when knitting lace (AllYarnsAreBeautiful/ayab-firmware#40)
• KH270, right-left rows always select needles Left 53-56 to D (AllYarnsAreBeautiful/ayab-firmware#215)

Full Changelog: 1.0.0-beta2...1.0.0-beta3

1.0.0-beta2

Updated beta release for the upcoming AYAB version 1.0.0

If you want to participate in the beta test programme, it helps us if you sign up via this Google form.
Thanks a lot!

Please check What's new in AYAB 1.0 for information on what changed since AYAB 0.95.

Changes from 1.0.0-beta1

Fixed:

• "Default Knit Side Image" does not flip loaded images (#711)
• Error when loading .stp files with non-ASCII colors (#716)

Known issues

This lists only issues that will definitely be fixed in 1.0:

• On Windows, the Beta2 release build crashes on launch. (#720)
• Needle selection is wrong on KH270, Beta builds. (AllYarnsAreBeautiful/ayab-firmware#204)
• Incorrect needle selection on 270, after starting AYAB with the carriage to the right of the left hall sensor. (#667)

1.0.0-beta1

Initial beta release for the upcoming AYAB version 1.0.0

If you want to participate in the beta test programme, it helps us if you sign up via this Google form.
Thanks a lot!

Please check What's new in AYAB 1.0 for information on what changed since AYAB 0.95.

Known issues

This lists only issues that will definitely be fixed in 1.0:

• "Default Knit Side Image" does not flip loaded images (#711)
• Error when loading .stp files with non-ASCII colors (#716)

0.99.0-rc6

Merge branch '1.0.0-dev' of github.com:AllYarnsAreBeautiful/ayab-desk…

0.99.0-rc4

Merge pull request #634 from AllYarnsAreBeautiful/fix-win-build

Fix Windows runtime issue

0.99.0-rc3

bump PyQt5 to version 5.15.10

0.99.0-rc2

bugfix for #608