Is there an existing issue for this?
Current Behavior
I have a Deya 6kwt inverter with two batteries connected to it.
The first battery, rated at 15kwt, is connected to the inverter via the CAN bus. The second battery has a different BMS and is connected to the first one without any communication. In other words, the inverter only recognises one battery.
My question/request is: is it possible to configure the settings so that I can add sensors from the other battery – the one that isn’t synchronised with the inverter via CAN – to the settings tab?
At the moment, if I add these sensors to the settings tab, the second battery isn’t displayed.
Thank you.
Translated with DeepL.com (free version)
Expected behaviour
Adding custom sensors to be displayed on the card.
Possible Solutions
No response
Mode
lite
Context / Reason
Adding custom sensors to be displayed on the card.
Is there an existing issue for this?
Current Behavior
I have a Deya 6kwt inverter with two batteries connected to it.
The first battery, rated at 15kwt, is connected to the inverter via the CAN bus. The second battery has a different BMS and is connected to the first one without any communication. In other words, the inverter only recognises one battery.
My question/request is: is it possible to configure the settings so that I can add sensors from the other battery – the one that isn’t synchronised with the inverter via CAN – to the settings tab?
At the moment, if I add these sensors to the settings tab, the second battery isn’t displayed.
Thank you.
Translated with DeepL.com (free version)
Expected behaviour
Adding custom sensors to be displayed on the card.
Possible Solutions
No response
Mode
lite
Context / Reason
Adding custom sensors to be displayed on the card.