Skip to content

PROTOCOL.md

Latest commit

 

History

History
669 lines (545 loc) · 34.5 KB

PROTOCOL.md

File metadata and controls

669 lines (545 loc) · 34.5 KB
Raw

claustrum protocol reference

claustrum speaks newline-delimited JSON-RPC 2.0 over an AF_UNIX SOCK_STREAM socket. This document is the complete wire contract; it is also the contract the validation battery checks byte-for-byte.

Transport

  • One JSON object per line (NDJSON). No length prefix, no binary framing.
  • A single request line is capped at 1 MiB (bufio max token = 1024*1024): a line up to 1048575 bytes is served, 1048576+ closes the connection with no reply. Large process.stdin payloads must be chunked under this.
  • AF_UNIX stream socket, created mode 0600 (owner only).
  • The connection is persistent: it stays open after a response, and id-less stream notifications arrive on it asynchronously.
  • A connection's requests are dispatched concurrently — responses may arrive out of request order; match them by id.

Named-pipe transport (Windows, opt-in)

A strictly additive claustrum extension — the reference daemon has no such transport. The AF_UNIX socket above is the default and the reference contract. As an opt-in, default-off addition (enabled with -serve -listen-pipe, or listen-pipe=true in claustrum.conf), claustrum additionally serves the exact same NDJSON JSON-RPC dispatch over a Windows named pipe, concurrently with the socket. It exists so a Windows client which cannot consume an AF_UNIX socket (notably Python asyncio, whose Unix transports are Unix-loop-only while its Windows Proactor loop natively supports named pipes) can still connect. When the flag is off, behavior is byte-for-byte identical to the reference; the wire contract, field ordering, and framing are unchanged whether a request arrives over the socket or the pipe.

  • Windows-only. The flag is ignored (with a warning) on every other platform, which serves JSON-RPC over the socket directly.
  • Name + discovery. claustrum chooses the pipe name (\\.\pipe\claustrum-<random-instance-id>); the client treats it as opaque and learns it by reading rpc.pipe in the socket's directory (beside rpc.sock / daemon.token). rpc.pipe is written atomically before the pipe begins accepting and before the daemon prints its ready line, and is removed on graceful shutdown — the same lifecycle as the socket. The fixed name + socket-dir location are the discovery contract, so they are not configurable.
  • Stale-file invariant. Because the name is per-boot-random, every -serve startup guarantees rpc.pipe exists iff a pipe is actively served this boot — mirroring the stale-socket clear. When the pipe is served the fresh name is written; when it is not (flag off, non-Windows, or the pipe failed to start), any leftover rpc.pipe from an unclean crash is removed, so a client can never read a stale file and dial a pipe that no longer exists.
  • Same auth. Requests over the pipe carry the same in-band "auth":"<token>"; the daemon.token handshake is unchanged, so a client discovers the token and the pipe name the same way.
  • Owner-only + local. The pipe is local by two independent mechanisms: an owner-only DACL (SDDL D:P(A;;GA;;;<current-user-SID>) — GENERIC_ALL to the daemon user's SID and to no world principal), the named-pipe analogue of the socket's 0600 mode; and remote-client rejection at pipe creation (FILE_PIPE_REJECT_REMOTE_CLIENTS, set by go-winio's ListenPipe), so a client reaching it over SMB is refused regardless of the DACL. See SECURITY.md.

Authentication

Every request carries a top-level "auth":"<token>". The server's expected token comes from -token-file (read once at startup, then unlinked) or -token-fd (read from an open descriptor, forwarded to the daemon over a pipe — no temp file); for the -bridge/-stop clients it comes from the CLAUDE_RPC_TOKEN environment variable. A bad or missing token → -32001 Unauthorized: invalid or missing auth token (also logged [Server] Unauthorized request: method=…, id=…).

The -bridge relay does not inject auth — whatever speaks through it must include "auth" itself.

Token persistence (daemon.token)

Once the socket is listenable, the daemon writes the token to daemon.token in the socket's directory (mode 0600, written atomically via a daemon.token-* temp file + rename), and unlinks it on graceful shutdown. This lets a client reconnect to an already-running daemon and re-authenticate after the original -token-file was unlinked / the -token-fd pipe closed — the token would otherwise be unrecoverable. The write is token-source-agnostic (it uses the in-memory token, so it works for both -token-file and -token-fd) and best-effort: a failure is logged ([daemon] failed to persist token: …) and non-fatal. Added by reference build 5db5e4a and matched here (off the JSON-RPC wire; the file sits beside the socket, not on it). An unclean kill (SIGKILL/crash) leaves the file behind, since removal runs only on the graceful server.shutdown / SIGTERM path.

Message shapes

// request
{"jsonrpc":"2.0","id":<n>,"method":"<ns>.<method>","params":{…},"auth":"<token>"}
// success
{"jsonrpc":"2.0","id":<n>,"result":{…}}
// error
{"jsonrpc":"2.0","id":<n>,"error":{"code":<c>,"message":"…"}}
// id-less stream notification (server -> client)
{"type":"stream","processId":"<id>","stream":"stdout|stderr|exit","seq":<n>,"data":"<base64>","exitCode":<n>}

Error codes

code meaning
-32700 parse error — malformed JSON line (response id is null)
-32600 Invalid JSON-RPC version — jsonrpc absent or != "2.0"
-32601 Invalid method format: <m> (method has no .), Unknown namespace: <ns> (well-formed but unknown namespace), or Unknown method: <ns>.<m> (known namespace, unknown method)
-32602 invalid params (see per-method messages)
-32603 internal error (e.g. open <path>: no such file or directory)
-32003 stdin offset gap: offset ahead of applied bytes — process.stdin with an offset past the applied high-water (added in 7c2f88d)
-32001 unauthorized

Validation precedence (probe-verified)

A request is checked in the order parse → auth → version → method → params:

  • Auth is validated before the jsonrpc version: a request that fails both (no auth and a missing/wrong jsonrpc) reports -32001 Unauthorized, not the version error.
  • Only once auth passes is jsonrpc == "2.0" enforced.

Params presence and typing

Every files.* / git.* / process.* method requires a params object:

  • Absent params → -32602 Invalid params — checked after method existence, so an unknown method is -32601 regardless.
  • An empty {} is accepted and runs the method's own validation.
  • Mistyped params — a wrong field type ("maxBytes":"4", "path":123) or a non-object value ("params":"x" / […]) — is also -32602 Invalid params; the daemon does not silently coerce or ignore the decode error.
  • Unknown extra fields are ignored — with one divergence in how strictly. claustrum binds params into one struct per namespace (pathParams, gitParams), so a field that is valid for the namespace but unused by this method still participates in decoding: a type-mismatched value there → -32602 (e.g. files.stat {"maxBytes":"{"}, git.status {"baseRepo":[1,2]}). The reference binds only the field the specific method reads and ignores the rest regardless of type, so it runs with defaults. A genuinely unknown key (in neither struct) is ignored by both. (Relatedly, on a pathological over-long path claustrum returns the empty exists:false result where the reference surfaces a -32603 stat error.) These only surface under adversarial params — a real client never sends them; accepted divergence, found by differential fuzzing.
  • server.* methods take no params, so a mistyped params on them is ignored and the call succeeds.

Methods (19)

server.capabilities self-describes the set. Order as returned:

server.ping  server.version  server.capabilities  server.shutdown
files.list   files.validate  files.stat  files.read  files.extract_tar
git.info     git.status      git.list_branches  git.worktree_create  git.worktree_remove
process.spawn  process.stdin  process.kill  process.killAndWait  process.reattach

process.killAndWait was added by the reference in 7c2f88d (it sits between process.kill and process.reattach), bringing the set to 19.

server.*

method params result
server.ping — {"pong":true}
server.version — {"version":"<id>","platform":"<goos>","arch":"<goarch>"}
server.capabilities — {"version":"<id>","methods":[…19…],"features":["process.stdin.offset"]}
server.shutdown — no response — the daemon stops and the connection closes

features array (added 7c2f88d). server.capabilities now carries a features array after methods, advertising optional protocol extensions a client may rely on. The sole entry is process.stdin.offset (the resumable/ idempotent stdin contract — see process.stdin below). Always present.

Divergence — auth on server.shutdown. claustrum validates the auth token for every method (§Auth), so an unauthenticated or wrong-token server.shutdown is rejected with -32001 Unauthorized and the daemon stays up. The reference does not authenticate server.shutdown — it stops on the request regardless of the token (no reply either way). Honest callers are byte-identical: -stop and the real client always send a valid token (bridge.go), and a valid-auth shutdown matches exactly (no response, the connection closes). Only an adversarial wrong/missing-auth shutdown differs, and there claustrum is the safer of the two (a bare socket peer can't kill it). Surfaced by differential fuzzing; intentional hardening.

files.* (param: path)

files.stat

{path} → {"exists","isDir","size","mode":"-rw-r--r--"}

  • Missing path → {exists:false,isDir:false,size:0,mode:""}.

files.list

{path} → {"entries":[{"name","path","isDir"},…]} (name-sorted)

  • Hidden entries are omitted — any name beginning with . (.git, .env, …) is skipped, matching the reference daemon.
  • isDir is resolved by Stat — symlinks are FOLLOWED: a symlink to a directory is isDir:true, a dangling symlink is isDir:false.
  • Missing dir → -32603 open …: no such file or directory.

files.read

{path[,maxBytes]} → {"content":"<raw text>","exists":true}

  • content is raw text, not base64.
  • Missing file → {content:"",exists:false} (not an error).
  • A directory → -32602 files.read: path is a directory.
  • Size > maxBytes → -32602 files.read: file exceeds maxBytes.

files.validate

{path} → {"valid":bool,"isDir":bool[,"error"]}

  • Missing path → {valid:false,isDir:false,error:"Path does not exist"}.

files.extract_tar

{archivePath,destDir} → extracts a gzip tar → {"success":true,"fileCount":<n>}

Side effects — deliberate, and not visible in the frame:

  1. destDir is wiped (os.RemoveAll) then recreated before unpacking — extraction is idempotent and destructive.
  2. Entries get owner-only fixed modes — files 0600, dirs 0700 (an executable 0755 entry still lands 0600).
  3. On success an empty .synced marker is written at destDir root (not counted in fileCount).
  4. archivePath is consumed — removed on every outcome once opened (success, bad gzip, or unsafe path).

Errors:

  • Missing params → -32602 archivePath and destDir are required.
  • Non-absolute/root destDir → {success:false,error:"destDir must be an absolute, non-root path: …"} — rejected before the archive is opened, so the archive is not consumed.
  • Bad gzip → {success:false,fileCount:0,error:"gzip: …"}.
  • An entry whose path escapes destDir ("zip slip") → {success:false,fileCount:0,error:"unsafe path in archive: <entry>"}; a ../ that resolves back inside destDir is allowed.
  • A non-regular/non-directory entry (symlink, hardlink, device, fifo) → {success:false,fileCount:0,error:"unsupported tar entry type <c>: <entry>"} — <c> is the tar typeflag char (symlink=2, hardlink=1).
  • destDir clean/mkdir or marker-write failures → clean destDir: … / mkdir destDir: … / write .synced: ….

git.* (param: path = repo dir; worktree ops use baseRepo)

git.info

{path} → repo: {"isRepo":true,"repo":"<dir>","branch":"<b>","root":"<abs>","repoSlug":"<owner/repo>","defaultBranch":"<b>"} · non-repo: {"isRepo":false,"repoSlug":"","defaultBranch":""}

  • branch is resolved via symbolic-ref, so it works on an unborn HEAD (empty repo with no commits → the init branch name, e.g. master).
  • A detached HEAD is reported as branch:"detached:<short-sha>".
  • root is the absolute repo top-level (git rev-parse --show-toplevel), so it stays the repo root even when path is a subdirectory (added by reference 7cbfa471; the 8de85faa baseline omitted it).
  • repoSlug and defaultBranch were added by reference 7c2f88d. Both are always present (empty string when undeterminable) — including on the non-repo body, which is now {"isRepo":false,"repoSlug":"","defaultBranch":""}.
    • repoSlug is the owner/repo parsed from remote.origin.url. It accepts the scp-like (git@host:owner/repo.git), scheme (https://, ssh://), userinfo, and trailing-slash forms and strips a single trailing .git, but is populated only when the path after the host is exactly two segments — a GitLab subgroup URL (host/group/sub/proj) has three and yields "". Owner/repo characters are preserved verbatim (case, -, _, .).
    • defaultBranch is what refs/remotes/origin/HEAD points to (e.g. main); empty when origin/HEAD is unset.

git.status

{path} → clean: {"isRepo":true,"clean":true} · dirty: {…,"clean":false,"changes":["M a.txt","?? new"]} (porcelain lines)

  • Non-repo → {"isRepo":false,"clean":false} — the full shape, unlike git.info's bare {"isRepo":false}.

git.list_branches

{path} → {"isRepo":true,"branches":[…sorted…]}

  • Non-repo → {"isRepo":false,"branches":[]}.

git.worktree_create

{baseRepo,branchName,worktreePath[,sourceBranch]} → {"success":true,"path":"<worktreePath>","sourceBranch":"<b>"}

  • The repo is baseRepo (not path); absent → the daemon's cwd repo.
  • Missing branchName → -32602 branchName is required.
  • Resolved repo isn't a git repo → {success:false,error:"not a git repository",errorCode:"not_a_repo"} — checked before the add, so git's raw error isn't leaked.
  • Other failure → {success:false,error:"git worktree add failed: …",errorCode:"worktree_add_failed"}.
  • When sourceBranch is omitted it defaults to the repo's current branch (and is echoed back). On an unborn HEAD (empty repo) the source resolves to empty, the add infers an orphan branch and still succeeds, and sourceBranch is omitted from the result.

git.worktree_remove

{baseRepo,worktreePath} → {"success":true} (lenient)

process.* (the agent/MCP-hosting core)

The client supplies its own id (any string). Output is delivered as id-less stream notifications, buffered for later replay.

process.spawn

{id,command[,args][,cwd][,env][,wantPid]} → {"success":true}, then stream frames

  • args: string[]. env: {KEY:VAL} merged over the daemon environment.
  • Missing id → -32602 Process ID is required; missing command → -32602 Command is required.
  • Reusing a still-live id succeeds and replaces the registry entry (like the reference). Divergence: claustrum also tears down the now-orphaned previous process tree (it would otherwise be unreachable via kill/stdin/reattach and leak), with its subscribers dropped first so no stray frames arrive under the reused id. OS-level only — no wire frame changes; the reference leaves the old process running.
  • wantPid opt-in (CT-1, claustrum-only). When the params carry "wantPid":true, the reply gains two fields after success: {"success":true,"pid":<int>,"startTime":<number>}. pid is the child's OS pid; startTime is the daemon's wall clock (epoch seconds) captured at spawn, returned identically on spawn and reattach for the same process. It is an opaque token for PID-reuse / orphan detection (CL-8): compare a persisted daemon value against a later daemon value for the same id. Do not equality- compare it against an independently-read OS process start time (e.g. psutil create_time) — the daemon's spawn-moment wall clock differs from the kernel's process-creation time by the fork→time.Now() delta and a different clock derivation. Default-mode is byte-identical: absent or false, the two fields are omitted (omitempty) and the frame is exactly the old {"success":true}. The fields live on a dedicated result struct, so they can never leak into a process.stdin/process.kill reply. An older daemon ignores the unknown wantPid param (tolerant decode), so a CT-1 client is safe to send it unconditionally — graceful degradation in both directions.

process.stdin

{id,data[,offset]} → {"success":true,"applied":<int>[,"duplicate":true]}

  • data is base64, written to the child's stdin.
  • Checks run in a fixed order (probe-verified): decode → exists → running → offset:
    • Invalid base64 → -32602 Invalid base64 data — returned before the process is even looked up, so an unknown id with a bad payload still reports the decode error.
    • Unknown id → -32602 Process not found.
    • Known but exited process → -32602 Process not running.
  • offset / applied — the resumable-stdin contract (added 7c2f88d, advertised as the process.stdin.offset feature). The reply now always carries applied: the cumulative count of stdin bytes accepted for delivery (the high-water mark). offset is the byte position the caller believes this data starts at; it makes stdin idempotent across reconnects:
    • absent offset, or offset == applied → append; applied grows by len(data).
    • offset > applied → -32003 stdin offset gap: offset ahead of applied bytes (a hole that would drop input — the caller must resend from applied). Nothing is enqueued.
    • offset + len(data) <= applied (wholly already applied) → no-op, reply adds "duplicate":true, applied unchanged, nothing reaches the child.
    • partial overlap (offset < applied < offset+len) → only the fresh tail data[applied-offset:] is written and applied advances to offset+len(data) (not flagged duplicate). applied counts base64-decoded bytes and is never omitempty (emitted even at 0); duplicate is dropped when false. A legacy client that never sends offset still works — it just always appends — and simply gains the applied field it can ignore.

process.kill

{id[,signal]} → {"success":true}

  • Best-effort, fire-and-forget; tears down the whole child tree — signals the process group on Unix, terminates the Job Object on Windows. Does not wait for the child to actually exit (contrast process.killAndWait).
  • Divergence: claustrum skips the signal when the child has already exited — after the child is reaped its Unix pgid can be recycled, so the reference's unconditional negative-pid signal could hit an unrelated process group. OS-level only — the reply is identical either way.

process.killAndWait

{id[,signal][,timeoutMs][,escalate]} → {"found":<bool>,"died":<bool>[,"alreadyExited":true][,"escalated":true]}

Added by reference 7c2f88d. Unlike process.kill, it blocks until the process is gone (up to the grace) and reports the outcome as a result (an unknown id is not an error):

  • Missing id → -32602 Process ID is required; absent params object → -32602 Invalid params.
  • Unknown id → {"found":false,"died":false}.
  • Already exited before the call → {"found":true,"died":true,"alreadyExited":true} (no signal sent).
  • Live process → the graceful signal (default SIGTERM) is sent, then it waits up to the grace:
    • timeoutMs sets that grace. Non-positive or absent → the 3000 ms default (probe-verified: 0 and -100 both wait 3000 ms); positive values are honored verbatim (50 ms → ~50 ms, 8000 ms → ~8 s). claustrum caps an absurd value at 600000 ms so a signal-ignoring child can't wedge a request forever — the reference clamps too, above the ~90 s ceiling we could observe.
    • escalate (default true) decides what happens if the process is still alive after the grace. true → escalate to SIGKILL, wait for the reap, and add "escalated":true to the reply. false → leave the process running and report {"found":true,"died":false} (no escalated, no SIGKILL).
  • On a process that dies within the grace (cooperative, or a hard signal:"KILL") → {"found":true,"died":true} with no escalated.

process.reattach

{id,fromSeq[,wantPid]} → {"found","running","firstSeq","lastSeq","stdinApplied"}

  • Replays buffered frames with seq > fromSeq (exclusive) to this connection, (re)subscribes it for future frames, then returns the result.
  • Unknown id → {found:false,running:false,firstSeq:0,lastSeq:0,stdinApplied:0}.
  • stdinApplied (added 7c2f88d). The process's cumulative applied-stdin byte count (§process.stdin), always present after lastSeq. A reconnecting client resumes stdin from this offset so no bytes are re-applied or dropped.
  • wantPid opt-in (CT-1, claustrum-only). As on process.spawn: with "wantPid":true and the process found, the reply appends "pid":<int>,"startTime":<number> after stdinApplied, reporting the same pid and startTime the spawn did (so a client can confirm it reattached to the same process, not a pid-reuse). Omitted when wantPid is absent/false or the process was not found — the default frame stays byte-identical.

Stream notifications

{"type":"stream","processId":"<id>","stream":"stdout","seq":1,"data":"<base64>"}
{"type":"stream","processId":"<id>","stream":"stderr","seq":2,"data":"<base64>"}
{"type":"stream","processId":"<id>","stream":"exit","seq":3,"exitCode":0}
  • seq is per-process, starts at 1, monotonic across stdout/stderr/exit.
  • data is base64 for stdout/stderr.
  • The exit frame carries exitCode and no data. A signal-terminated child reports exitCode: -1 (not 128+signo).
  • Each stdout/stderr frame carries at most one 32 KiB read (the streaming read buffer); larger output is split across frames. A client reassembles by concatenating data in seq order.
  • Exact frame boundaries depend on pipe scheduling and are not stable — only the reassembled bytes are. (Both the 32 KiB cap and the -1 signal code are probe-verified against the reference.)
  • The replay buffer retains frames for the life of the process, so reattach{fromSeq:0} replays everything.
  • A process survives the disconnect of the connection that spawned it; another connection can pick it up via reattach. This is the multi-attach / reconnect mechanism.

Daemon lifecycle (flags)

One binary, five modes. Everything below is probe-verified against the reference unless marked claustrum-only.

-serve — run the daemon

claustrum -serve -socket <p> {-token-file <p> | -token-fd <n>} [-metrics-addr <a>] [-keep-children] [-listen-pipe]

Self-daemonizes (reparents to init / detached), extracts the login-shell PATH (Unix), then runs the RPC server. On success it prints Claustrum remote server listening on <socket> to stdout.

Token source — required, and checked before the socket:

  • Missing both flags → claustrum: daemonized child requires --token-file or --token-fd, exit 1.
  • CLAUDE_RPC_TOKEN is not accepted for -serve (it is only for the -bridge/-stop clients) — the daemon never starts unauthenticated.
  • The token is read as a line: one trailing \n/\r\n is stripped; spaces and other surrounding whitespace are preserved verbatim (a token file ending in a newline still authenticates).
  • A bad -token-file → claustrum: read --token-file: <err>, exit 1.
  • -token-file is read once at startup, then unlinked.

-token-fd <n> (claustrum-only) — token from a descriptor, no temp file:

  • Reads the token from an already-open file descriptor (-token-fd 0 = stdin), so it never touches disk.
  • Because -serve re-execs to daemonize, the parent reads the fd and forwards the token to the detached child over an inherited pipe — never via disk, argv, or the environment.
  • Additive and off the wire: -token-file callers are unaffected, and without the flag the reference is matched byte-for-byte.

Daemonize sentinel (internal; claustrum-namespaced) — the re-exec marker that tells a freshly-exec'd process "you are the detached child, don't re-daemonize" is CLAUSTRUM_DAEMON_CHILD, not the reference daemon's CLAUDE_SSH_DAEMON_CHILD. The reference name cannot serve this role here: a host running inside a real claude-ssh session exports CLAUDE_SSH_DAEMON_CHILD=1 to every descendant, so the claustrum launcher would inherit it ambiently, mistake itself for the already-daemonized child, skip the parent token-forward path, and exit 1. The sentinel is purely internal (never on the wire), so namespacing it is free. Observable parity is preserved separately: daemonizeWithToken still sets CLAUDE_SSH_DAEMON_CHILD=1 in the daemon's own environ so it propagates verbatim into process.spawn children, exactly as the reference does (pinned by TestSpawnInheritsDaemonChildMarker); the internal CLAUSTRUM_DAEMON_CHILD is unset in the child before it spawns anything, so it never leaks downstream.

-metrics-addr <a> (claustrum-only) — opt-in observability:

  • Serves Prometheus-format counters at http://<a>/metrics — connections, process spawns/exits, reattaches, stream/stdin bytes.
  • Off by default: no listener exists unless the flag is passed; not part of the JSON-RPC wire contract, so parity is unaffected.
  • Counts only (no command output, no tokens) and no auth — bind it to a trusted interface (loopback).
  • A bind failure is logged ([Server] metrics: …) and non-fatal.
  • Also settable in claustrum.conf as metrics-addr = <a> (an explicit -metrics-addr flag wins); see -version / IMPROVEMENTS CT-3.

-keep-children (claustrum-only, CT-2; POSIX-only) — survive a daemon restart:

  • Off by default, behavior is unchanged: graceful shutdown (a server.shutdown RPC, SIGTERM, or SIGINT) kills the whole child-process tree, exactly as before.
  • With the flag set, graceful shutdown tears down the listener and client connections but leaves spawned children running, so they survive a daemon restart/upgrade. It logs one line — [Server] -keep-children: leaving <n> running child process(es) alive across shutdown.
  • The new daemon does not re-adopt the survivors (no persist / re-manage); an out-of-band consumer reconciles them (e.g. via the CT-1 pid/startTime).
  • Survivors lose their stdio. A child's stdin/stdout/stderr are pipes whose other ends die with the daemon: the survivor sees EOF on stdin, and a later write to stdout/stderr fails — SIGPIPE (default disposition: terminate) for a child that hasn't ignored it, EPIPE write errors for one that has (Node.js ignores SIGPIPE by default, so Node children get write errors, not killed). Survival is therefore only useful for children that tolerate dead stdio — quiet workers, EPIPE-tolerant processes, or children that re-plumb their own output. There is no way for the daemon to re-plumb a live child's fds.
  • Off the wire: no method, frame, or capability changes — it is a lifecycle flag, so parity is unaffected (default-mode frames are byte-identical).
  • Windows decision: the flag is POSIX-only. Children are confined to a Job Object created with KILL_ON_JOB_CLOSE, which the OS terminates when the daemon exits regardless of any shutdown-time choice. Rather than silently kill while claiming to keep, Windows ignores the flag and logs a warning at startup ([Server] -keep-children is not supported on Windows …). The hosted channel that uses this is POSIX-only anyway.
  • Also settable in claustrum.conf as keep-children = true|false (an explicit -keep-children flag wins).
  • (Implementation note: shutdown teardown now runs synchronously on the main goroutine so the kill-or-keep decision reliably completes before the process exits — it previously ran in a goroutine that could lose the race to the accept loop's return, skipping child teardown entirely.)

-listen-pipe (claustrum-only, CT-5; Windows-only) — additional named-pipe transport:

  • Off by default, byte-for-byte identical to the reference. When set, the daemon additionally serves the same NDJSON JSON-RPC dispatch over a Windows named pipe, concurrently with the AF_UNIX socket — the socket, wire contract, field ordering, and framing are unchanged. Same "auth" handshake.
  • Exists so a Windows client that cannot consume AF_UNIX (e.g. Python asyncio, pinned to the Proactor loop) can connect over a pipe, which that loop supports natively. See Named-pipe transport.
  • claustrum picks the pipe name and publishes it to rpc.pipe beside the socket (written before accepting/ready, removed on graceful shutdown); the client reads that file to discover the opaque name.
  • The pipe is owner-only (SDDL D:P(A;;GA;;;<current-user-SID>), the analogue of the socket's 0600) and local-only.
  • Windows-only: ignored with a warning on other platforms (they use the socket directly). A setup failure is logged ([Server] named-pipe transport: …) and non-fatal — the socket still serves.
  • Also settable in claustrum.conf as listen-pipe = true|false (an explicit -listen-pipe flag wins).

-bridge — stdio↔socket relay

claustrum -bridge -socket <p>

A dumb relay — what an SSH session attaches to. It injects no auth; whatever speaks through it supplies "auth" itself.

  • Strict: a dial failure is a hard error — claustrum: dial server: <err> on stderr, exit 1.

-stop — ask a running daemon to shut down

claustrum -stop -socket <p>          # auth read from CLAUDE_RPC_TOKEN

Sends server.shutdown.

  • Best-effort: a missing or unreachable daemon is a silent no-op — exit 0, no output. Only a live daemon's response (if any) is echoed to stdout.

-version

claustrum -version                   # → claustrum <id> (built <time>)

Intentional divergence: version-override via claustrum.conf (claustrum-only, CT-3). An optional key = value file named claustrum.conf, read from the directory holding the binary, gates a few opt-in divergences; absent/malformed ⇒ stock. If it sets version-override to a bare commit SHA (git SHA-1, 40 hex — the string the desktop client pins; 64-hex also accepted; anything else is a no-op), the output becomes:

claustrum -version                   # → claude-ssh <sha> (via Claustrum <id>, built <time>)

This exists so the desktop client treats an already-deployed claustrum as up-to-date — it keys re-upload on <bin> --version matching /claude-ssh\s+(\S+)/ against the pinned SHA. It is CLI stdout only — not a JSON-RPC frame — so the wire contract is untouched; server.version / server.capabilities still report claustrum's own <id>. The same file also carries keep-children and metrics-addr defaults (precedence: explicit CLI flag > config > default). See IMPROVEMENTS.md CT-3 for the full contract, key list, and hardening.

-install — ensure the agent CLI

claustrum -install -cli-dir <d> -cli-version <v> \
          [-cli-url <u> -cli-checksum <sha256>] [-cli-zst <p>] [-cli-keep <n>]

Download / verify / extract / prune, then print one __INSTALL_RESULT__<json> facts line. -install itself always exits 0 — failures are reported inside the facts (cliError), not via the exit code.

Checksum + error framing (probe-verified):

  • -cli-checksum is verified on the download (-cli-url) path unconditionally — an empty -cli-checksum still fails (checksum mismatch: expected=, actual=<sha>).
  • Input/decompress failures surface as cliError strings: opening input: <err> (zst read) and decompressing: <err> (bad zstd blob).

Behavior shared by every mode

  • Default socket — when -socket is omitted, -serve/-bridge/-stop fall back to ~/.claude/remote/rpc.sock. The parent directory is not created, so -serve on a missing ~/.claude/remote fails with claustrum: listen unix: …: bind: no such file or directory. (The deployment always passes -socket; this only matters for bare invocations.)
  • No mode given → claustrum: one of --version/--install/--serve/--bridge/--stop is required on stderr, exit 2 — no usage dump. An unknown flag still gets the stdlib flag error + usage, exit 2.

Intentional divergence: -cli-zst checksum (claustrum-only, D1)

See IMPROVEMENTS.md D1 for history.

  • The reference never checksum-verifies the local -cli-zst (SFTP-upload) path — it trusts the already-authenticated channel, so a wrong/empty checksum is ignored and the blob installs.
  • Claustrum verifies -cli-zst when (and only when) a -cli-checksum is supplied, rejecting a corrupt/tampered blob with the same checksum mismatch: expected=<x>, actual=<y> error. The source blob is left intact, not consumed.
  • An absent/empty -cli-checksum stays trusting — byte-identical to the reference — so honest callers are unaffected.
  • The observable delta, for a supplied wrong checksum only: a valid blob the reference would install now returns checksum mismatch (was success), and a corrupt blob returns checksum mismatch instead of decompressing: <err>.

See ARCHITECTURE.md for the -install facts schema and the deployment lifecycle, and EXAMPLES.md for runnable snippets.