Checklist
Contact Details
No response
Feature or improvement you want
In firmware 2.7.18 (i think) the ability to seperate coding rate from the preset was added. This way you could remain on preset LONG_FAST for example while being allowed to bump the coding rate error correction up for more robust connections. Currently you have to disable the preset, change the CR, set the slot back to 20 from 17 and save. Then you need to go into the channel information and set the channel name from "" to "LongFast" and the key to "AQ=="
Why should this be added?
to make changing the coding rate much simpler.
Screenshots / Drawings / Technical details
No response
Checklist
I have used the search function for OPEN ISSUES to see if someone else has already submitted the same feature request.
I have also used the search function for CLOSED ISSUES to see if the feature was already implemented and is just waiting to be released, or if the feature was rejected.
I will describe the request with as much detail as possible.
This request contains only one single feature, not a list of multiple (related) features.
I have read and understood the Contribution Guidelines.
I agree to follow this project's Code of Conduct
Contact Details
No response
Feature or improvement you want
In firmware 2.7.18 (i think) the ability to seperate coding rate from the preset was added. This way you could remain on preset LONG_FAST for example while being allowed to bump the coding rate error correction up for more robust connections. Currently you have to disable the preset, change the CR, set the slot back to 20 from 17 and save. Then you need to go into the channel information and set the channel name from "" to "LongFast" and the key to "AQ=="
Why should this be added?
to make changing the coding rate much simpler.
Screenshots / Drawings / Technical details
No response