Skip to content

README.md

Latest commit

 

History

History
221 lines (164 loc) · 5.25 KB

README.md

File metadata and controls

221 lines (164 loc) · 5.25 KB
Raw

etcdv3-ruby Gem Version Build Status codecov

Ruby client for Etcd V3

Getting Started

RubyDocs

To install etcdv3, run the following command:

gem install etcdv3

Establishing a connection

require 'etcdv3'

# Insecure connection
conn = Etcdv3.new(endpoints: 'http://127.0.0.1:2379, http://127.0.0.1:2389, http://127.0.0.1:2399')

# Secure connection using default certificates
conn = Etcdv3.new(endpoints: 'https://hostname:port')

# Secure connection with Auth
conn = Etcdv3.new(endpoints: 'https://hostname:port', user: 'root', password: 'mysecretpassword')

# Secure connection specifying custom certificates
conn = Etcdv3.new(endpoints: 'https://hostname:port', custom_certificates: {
  root_ca: 'path-to-root-ca.pem',
  key: 'path-to-private-key.pem',
  cert: 'path-to-cert.pem'
})

High Availability

In the event of a failure, the client will work to restore connectivity by cycling through the specified endpoints until a connection can be established. With that being said, it is encouraged to specify multiple endpoints when available.

Adding, Fetching and Deleting Keys

 # Put
 conn.put('foo', 'bar')

 # Get
 conn.get('my')

 # Get actual value
 value = conn.get('my').kvs.first.value

 # Get Key Range
 conn.get('foo', range_end: 'foo80')

 # Delete Key
 conn.del('foo')

 # Delete Key Range
 conn.del('foo', range_end: 'foo80')

User Management

# Add User
conn.user_add('admin', 'secret')

# Delete User
conn.user_delete('admin')

# Get User
conn.user_get('admin')

# List Users
conn.user_list

Role Management

# Add Role
conn.role_add('admin')

# Grant Permission to Role
conn.role_grant_permission('admin', :readwrite, 'foo', 'foo99')

# Delete Role
conn.role_delete('admin')

# List Roles
conn.role_list

Authentication Management

# Configure a root user
conn.user_add('root', 'mysecretpassword')

# Grant root role to root user
conn.user_grant_role('root', 'root')

# Enable Authentication
conn.auth_enable

After you enable authentication, you must authenticate.

# This will generate and assign an auth token that will be used in future requests.
conn.authenticate('root', 'mysecretpassword')

Disabling auth will clear the auth token and all previously attached user information

conn.auth_disable

Leases

# Grant a lease with a 100 second TTL
conn.lease_grant(100)

# Attach key to lease
conn.put('foo', 'bar', lease: 1234566789)

# Get information about lease and its attached keys
conn.lease_ttl(1234566789)

# Revoke lease and delete all keys attached
conn.lease_revoke(1234566789)

Transaction

Transactions provide an easy way to process multiple requests in a single transaction.

Note: You cannot modify the same key multiple times within a single transaction.

# https://github.com/davissp14/etcdv3-ruby/blob/master/lib/etcdv3/kv/transaction.rb
conn.transaction do |txn|
  txn.compare = [
    # Is the value of 'target_key' equal to 'compare_value'
    txn.value('target_key', :equal, 'compare_value'),
    # Is the version of 'target_key' greater than 10
    txn.version('target_key', :greater, 10)
  ]

  txn.success = [
    txn.put('txn1', 'success')
  ]

  txn.failure = [
    txn.put('txn1', 'failed', lease: lease_id)
  ]
end

Watch

# Watch for changes on a specified key for at most 10 seconds and return
events = conn.watch('foo', timeout: 10)

# Watch for changes on a specified key range and return
events = conn.watch('foo', range_end: 'fop')

# Watch for changes since a given revision
events = conn.watch('foo', start_revision: 42)

# Watches for changes continuously until killed.
event_count = 0
conn.watch('boom') do |events|
  puts events
  event_count = event_count + 1
  break if event_count >= 10
end

Locks

# First, get yourself a lease
lease_id = conn.lease_grant(100)['ID']

# Attempt to lock distibuted lock 'foo', wait at most 10 seconds
lock_key = conn.lock('foo', lease_id, timeout: 10).key

# Unlock the 'foo' lock using the key returned from `lock`
conn.unlock(key)

# Perform a critical section while holding the lock 'hello'
conn.with_lock('hello', lease_id) do
  puts "kitty!"
end

Alarms

# List all active Alarms
conn.alarm_list

# Deactivate ALL active Alarms
conn.alarm_deactivate

Timeouts

The default timeout for all requests is 120 seconds.

# Specify `command_timeout` to override the default global timeout.
conn = Etcdv3.new(endpoints: 'https://hostname:port', command_timeout: 5) # 5 seconds

# You can also specify request specific timeouts.
conn.get("foo", timeout: 2)

Timeouts apply to and can be set when:

  • Adding, Fetching and Deleting keys
  • User, Role, and Authentication Management
  • Leases
  • Transactions

Note: Timeouts currently do not affect Watch or Maintenance related commands.

Contributing

If you're looking to get involved, Fork the project and send pull requests.