RPi Camera + USB microphone

[alegag]

Hi,

I'm trying to merge a video stream with an audio stream.

The Camera is a Raspberry Pi Camera Module V3. I'm able to make it stream by itself.

And the audio source is from a USB microphone, which I'm able to record from with ffmpeg.

To record from the USB microphone:

ffmpeg -ar 8000  -ac 1 -f alsa -i hw:1 -ac 1 -acodec aac -b:a 512k -f mp4 test.mp4

This works properly.

In the rtsp-simple-server configuration, I have this for the camera:

paths:
  cam:
    source: rpiCamera
    rpiCameraWidth: 1920
    rpiCameraHeight: 1080

Which also works properly.

Now, based on other question, I have tried to merge using runOnDemand and ffmpeg, but the stream crash when I request it.

Below the section above, I have added this:

  audio:
    runOnDemand: ffmpeg -hide_banner -loglevel error -i rtsp://localhost:8554/cam -c:v copy -f alsa -ac 1 -i hw:1 -af "volume=20dB" -acodec aac -b:a 512k -f rtsp rtsp://localhost:8554/audio

Any idea what I'm missing here ?

If I remove the -i rtsp://localhost:8554/cam -c:v copy part, I'm able to stream the audio only, so the problem seems to be with getting the camera stream.

Thank you !

[aler9]

Hello, this is a FFmpeg question, not a server question, anyway, from my experience, input streams must be put at the beginning of the command, then you have to map them, then you can choose the codec, and finally you can send out the stream.

Example:

ffmpeg -hide_banner -loglevel error \
-i rtsp://localhost:8554/cam \
-i hw:1 \
-map 0:v:0 \
-map 1:a:0 \
-c:v copy -f alsa -ac 1 -af "volume=20dB" -acodec aac -b:a 512k \
-f rtsp rtsp://localhost:8554/audio

[aler9]

By the way, the README has been updated with step-by-step instructions on how to add audio to an existing RPI Camera stream. GStreamer has been chosen over FFmpeg because tests showed that it introduces less latency:

https://github.com/bluenviron/mediamtx#from-a-raspberry-pi-camera

[ichalmers]

I've used your example to get this running on a rpi zero with a microphone. The one thing I need to do is change the audio from opus to aac. I've been trying to change the gstreamer settings to make this work (without luck).

Is there any chance of an example which would output aac?

[aler9]

Is there any chance of an example which would output aac?

Replace opusenc with avenc_aac, which is documented here.

[bluenviron-bot]

This discussion is being locked automatically because the last update was more than 2 years ago.

Do not use the content of this discussion as reference since it's probably outdated!

The official documentation is the only place in which you can find up-to-date answers.