Describe your problem
From last month testing the Pow-P1 in croatia and have some problems,
-some data not visible (V,A)
-gauge in gui shows export (no import )
-readings of consumated power are correct but on import gauge shows value for rate T1 and on export gauge rate T2

Hardware information:
Country: Croatia
HEP Elektroistra
Meter: Iskra IE.5 (3 phase)
Encryption enabled: No
AMS reader: Pow-P1
NO Power production

Relevant firmware information:

• Version: 2.5.6
• MQTT: [yes]
• MQTT payload type: [homeassistant]
• HAN GPIO: [ ]
• HAN baud and parity: [ ]
• ENTSO-E API enabled: [no]

Log from telnet:

(V) 0F 00 09 1B 12 0C 07 EA 04 07 02 0F 00 28 00 FF
(V) C4 00 02 1C 09 08 39 35 37 30 30 34 34 35 09 04
(V) 0F 00 28 00 09 05 07 EA 04 07 02 06 00 3D D7 93
(V) 06 00 26 91 38 06 00 17 46 5B 06 00 00 00 00 06
(V) 00 00 00 00 06 00 00 00 00 06 00 00 02 40 06 00
(V) 00 00 00 06 00 00 00 E4 06 00 00 00 C1 06 00 00
(V) 00 99 06 00 00 00 00 06 00 00 00 00 06 00 00 00
(V) 00 12 09 6A 12 09 77 12 09 4F 12 00 6B 12 00 66
(V) 12 00 5B 06 00 01 86 9F 01 01 12 24 B8 01 01 12
(V) 24 B8 01 01 12 24 B8 03 01
(D) Received valid DLMS at 18 +135
(V) Using application data:
(V) 02 1C 09 08 39 35 37 30 30 34 34 35 09 04 0F 00
(V) 28 00 09 05 07 EA 04 07 02 06 00 3D D7 93 06 00
(V) 26 91 38 06 00 17 46 5B 06 00 00 00 00 06 00 00
(V) 00 00 06 00 00 00 00 06 00 00 02 40 06 00 00 00
(V) 00 06 00 00 00 E4 06 00 00 00 C1 06 00 00 00 99
(V) 06 00 00 00 00 06 00 00 00 00 06 00 00 00 00 12
(V) 09 6A 12 09 77 12 09 4F 12 00 6B 12 00 66 12 00
(V) 5B 06 00 01 86 9F 01 01 12 24 B8 01 01 12 24 B8
(V) 01 01 12 24 B8 03 01

data from provider

OBIS Name
1-0:96.1.0 Device ID, manufacturing number
1-0:0.9.1 Local time
1-0:0.9.2 Local date
1-0:1.8.0 Active energy import (+A)
1-0:1.8.1 Active energy import (+A) Rate T1
1-0:1.8.2 Active energy import (+A) Rate T2
1-0:2.8.0 Active energy export (-A)
1-0:2.8.1 Active energy export (-A) Rate T1
1-0:2.8.2 Active energy export (-A) Rate T2
1-0:1.7.0 Instantaneous active import power (+P)
1-0:2.7.0 Instantaneous active export power (-P)
1-0:21.7.0 Instantaneous active import power (+P) L1
1-0:41.7.0 Instantaneous active import power (+P) L2
1-0:61.7.0 Instantaneous active import power (+P) L3
1-0:22.7.0 Instantaneous active export power (-P) L1
1-0:42.7.0 Instantaneous active export power (-P) L2
1-0:62.7.0 Instantaneous active export power (-P) L3
1-0:32.7.0 Instantaneous voltage L1
1-0:52.7.0 Instantaneous voltage L2
1-0:72.7.0 Instantaneous voltage L3
1-0:31.7.0 Instantaneous current L1
1-0:51.7.0 Instantaneous current L2
1-0:71.7.0 Instantaneous current L3
0-0:17.0.0 Limiter 1
1-0:31.4.0 Supervision monitor 1 - Fuse supervision L1
1-0:51.4.0 Supervision monitor 2 - Fuse supervision L2
1-0:71.4.0 Supervision monitor 3 - Fuse supervision L3
0-0:96.3.10 Disconnect control