| Command | Octal | Keyboard | D200 | D210 | Notes |
|---|---|---|---|---|---|
| Bell | 007 | Ctrl-G | Y | Y | Must be allowed by your window manager |
| Blink Disable | 004 | Ctrl-D | Y | Y | Disable blinking on screen |
| Blink Enable | 003 | Ctrl-C | Y | Y | Enable blinking on screen |
| Blink Off | 017 | Ctrl-O | Y | Y | |
| Blink On | 016 | Ctrl-N | Y | Y | |
| Break (CMD-Break) | - | Break Button | Y | Y | Only affects Serial operation |
| Carriage Return | 015 | Ctrl-M or CR | Y | Y | No implied new line |
| Cursor Down | 032 | Ctrl-Z or ↓ | Y | Y | |
| Cursor Left | 031 | Ctrl-Y or ← | Y | Y | |
| Cursor Right | 030 | Ctrl-X or → | Y | Y | |
| Cursor Up | 027 | Ctrl-W or ↑ | Y | Y | |
| Dim Off | 035 | Ctrl-} | Y | Y | |
| Dim On | 034 | Ctrl-\ | Y | Y | |
| Erase EOL | 013 | Ctrl-K or Erase EOL | Y | Y | Erase from Cursor to End of Line |
| Erase (Unprotected) to End of Screen | 036 106 106 | Cmd-Brk FF | - | Y | Introduced in D210 |
| Erase Page/Window | 014 | Ctrl-L or Erase Page | Y | Y | ~Clear Screen on a D200 |
| New Line | 012 | Ctrl-J | Y | Y | ~Enter/Return |
| Print Form | 001 | Ctrl-A or Shift-Local Print | N | N | TODO |
| Print Screen/Window | 021 | Ctrl-Q or Local Print | N | N | TODO |
| Read Model ID | 036 103 | Cmd-Brk C | Y | Y | |
| Read Cursor/Window Address | 005 | Ctrl-E | Y | Y | Times out after 0.5s if host not listening |
| Remote Test Enter | 036 101 | N | N | Will not implement in emulator | |
| Remote Test Exit | 036 102 | N | N | Will not implement in emulator | |
| Reverse Video Off | 036 105 | Cmd-Brk E | Y | Y | Inverse Chars off |
| Reverse Video Off | 002 | Ctrl-B | - | Y | Introduced in D210 |
| Reverse Video On | 036 104 | Cmd-Brk D | Y | Y | Inverse Chars on |
| Reverse Video On | 026 | Ctrl-V | - | Y | Introduced in D210 |
| Roll Disable | 023 | Ctrl-S | Y | Y | Turn on 'paged mode' |
| Roll Enable | 022 | Ctrl-R | Y | Y | Turn on normal scrolling |
| Underscore Off | 025 | Ctrl-U | Y | Y | |
| Underscore On | 024 | Ctrl-T | Y | Y | |
| Window Home | 010 | Ctrl-H | Y | Y | |
| Write Window Address | 020 n n | Ctrl-P col row | Y | Y | Move cursor to addr |
Also: Home (010) and Tab (011) which were not considered to be 'commands' in the DG documentation.