diff --git a/docs/en/flight_controller/accton-godwit_ga1.md b/docs/en/flight_controller/accton-godwit_ga1.md
index 3bc3c921a57f..0bf200676dd0 100644
--- a/docs/en/flight_controller/accton-godwit_ga1.md
+++ b/docs/en/flight_controller/accton-godwit_ga1.md
@@ -105,6 +105,45 @@ A1-A8(FMU PWM) are grouped as:
 The motor and servo system should be connected to these ports according to the order outlined in the fuselage reference for your carrier.
 
 ![G-A1 PWM Motor Servo](../../assets/flight_controller/accton-godwit/ga1/motor_servo.png "G-A1 PWM Motor Servo")
+<!-- pwm_outputs-proposed
+<!-- pwm_outputs-proposed
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+FMU Outputs:
+
+- Outputs 1-6 support [DShot](../peripherals/dshot.md).
+- Outputs 7-8 do not support DShot.
+- Outputs 1-6 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 8 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer5)
+- Outputs 5-6 in group2 (Timer4)
+- Outputs 7-8 in group3 (Timer12)
+
+All outputs within the same group must use the same output protocol and rate.
+-->
+
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+FMU Outputs:
+
+- Outputs 1-6 support [DShot](../peripherals/dshot.md).
+- Outputs 7-8 do not support DShot.
+- Outputs 1-6 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 8 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer5)
+- Outputs 5-6 in group2 (Timer4)
+- Outputs 7-8 in group3 (Timer12)
+
+All outputs within the same group must use the same output protocol and rate.
+-->
 
 ## RC Input
 
diff --git a/docs/en/flight_controller/airlink.md b/docs/en/flight_controller/airlink.md
index b59abb04c4eb..141d2ad3af5a 100644
--- a/docs/en/flight_controller/airlink.md
+++ b/docs/en/flight_controller/airlink.md
@@ -341,6 +341,20 @@ AIRLink has 16 PWM outputs. Main outputs 1-8 and connected to IO MCU. AUX output
 | AUX 8  | Timer 12 | Channel 2 |
 
 [DShot](../peripherals/dshot.md) can be used on the first four AUX pins.
+<!-- pwm_outputs-proposed
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+[DShot](../peripherals/dshot.md) is not supported.
+
+The 8 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-6 in group2 (Timer4)
+- Outputs 7-8 in group3 (Timer12)
+
+All outputs within the same group must use the same output protocol and rate.
 
 ## Building Firmware
 
diff --git a/docs/en/flight_controller/ark_fpv.md b/docs/en/flight_controller/ark_fpv.md
index 6dd1a9da0a70..8eb449285ad3 100644
--- a/docs/en/flight_controller/ark_fpv.md
+++ b/docs/en/flight_controller/ark_fpv.md
@@ -13,6 +13,24 @@ The USA-built ARK FPV flight controller is based on the [ARKV6X](https://arkelec
 This flight controller is [manufacturer supported](../flight_controller/autopilot_manufacturer_supported.md).
 :::
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 9 FMU PWM outputs (MAIN).
+
+Outputs:
+
+- Outputs 1-8 support [DShot](../peripherals/dshot.md).
+- Output 9 does not support DShot.
+- Outputs 1-8 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 9 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer5)
+- Outputs 5-8 in group2 (Timer8)
+- Output 9 in group3 (Timer4)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where To Buy {#store}
 
 Order from [Ark Electronics](https://arkelectron.com/product/arkv6x/) (US)
diff --git a/docs/en/flight_controller/ark_pi6x.md b/docs/en/flight_controller/ark_pi6x.md
index b37a8b451a25..0f88307e9da1 100644
--- a/docs/en/flight_controller/ark_pi6x.md
+++ b/docs/en/flight_controller/ark_pi6x.md
@@ -13,6 +13,24 @@ The [ARK Pi6X Flow](https://arkelectron.gitbook.io/ark-documentation/flight-cont
 This flight controller is [manufacturer supported](../flight_controller/autopilot_manufacturer_supported.md).
 :::
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (MAIN).
+
+Outputs:
+
+- Outputs 1-6 support [DShot](../peripherals/dshot.md).
+- Outputs 7-8 do not support DShot.
+- Outputs 1-6 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 8 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer5)
+- Outputs 5-6 in group2 (Timer4)
+- Outputs 7-8 in group3 (Timer12)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 Order this module from:
diff --git a/docs/en/flight_controller/ark_v6x.md b/docs/en/flight_controller/ark_v6x.md
index 3d6af0bf2d25..68ff02404ebd 100644
--- a/docs/en/flight_controller/ark_v6x.md
+++ b/docs/en/flight_controller/ark_v6x.md
@@ -16,6 +16,24 @@ The Pixhawk Autopilot Bus (PAB) form factor enables the ARKV6X to be used on any
 This flight controller is [manufacturer supported](../flight_controller/autopilot_manufacturer_supported.md).
 :::
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+FMU Outputs:
+
+- Outputs 1-6 support [DShot](../peripherals/dshot.md).
+- Outputs 7-8 do not support DShot.
+- Outputs 1-6 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 8 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer5)
+- Outputs 5-6 in group2 (Timer4)
+- Outputs 7-8 in group3 (Timer12)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where To Buy {#store}
 
 Order From [Ark Electronics](https://arkelectron.com/product/arkv6x/) (US)
diff --git a/docs/en/flight_controller/corvon_743v1.md b/docs/en/flight_controller/corvon_743v1.md
index 1f142d079341..08e7577f9647 100644
--- a/docs/en/flight_controller/corvon_743v1.md
+++ b/docs/en/flight_controller/corvon_743v1.md
@@ -38,6 +38,24 @@ This flight controller is [manufacturer supported](../flight_controller/autopilo
   - 5V 3A BEC
   - ADC for battery voltage (up to 6S) and current monitoring
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 10 FMU PWM outputs (MAIN).
+
+Outputs:
+
+- Outputs 1-10 support [DShot](../peripherals/dshot.md).
+- Outputs 1-9 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+- Output 10 supports Bidirectional DShot output only (no eRPM capture).
+
+The 10 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-6 in group2 (Timer3)
+- Outputs 7-10 in group3 (Timer4)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy
 
 Order from [CORVON](https://corvon.tech).
diff --git a/docs/en/flight_controller/cuav_nora.md b/docs/en/flight_controller/cuav_nora.md
index 8c9fee2791e4..366b852522ed 100644
--- a/docs/en/flight_controller/cuav_nora.md
+++ b/docs/en/flight_controller/cuav_nora.md
@@ -72,6 +72,26 @@ When it runs PX4 firmware, only 8 PWM outputs work.
 The remaining 6 PWM ports are still being adapted (so it is not compatible with VOLT at time of writing).
 :::
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 14 FMU PWM outputs (MAIN).
+
+Outputs:
+
+- Outputs 1-12 support [DShot](../peripherals/dshot.md).
+- Outputs 13-14 do not support DShot.
+- Outputs 1-7, 9-12 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+- Output 8 supports Bidirectional DShot output only (no eRPM capture).
+
+The 14 outputs are in 4 groups:
+
+- Outputs 1-4 in group1 (Timer5)
+- Outputs 5-8 in group2 (Timer4)
+- Outputs 9-12 in group3 (Timer1)
+- Outputs 13-14 in group4 (Timer12)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 - [CUAV Store](https://store.cuav.net)<\br>
diff --git a/docs/en/flight_controller/cuav_pixhawk_v6x.md b/docs/en/flight_controller/cuav_pixhawk_v6x.md
index 6840b7a0475d..3d3628cf8389 100644
--- a/docs/en/flight_controller/cuav_pixhawk_v6x.md
+++ b/docs/en/flight_controller/cuav_pixhawk_v6x.md
@@ -104,6 +104,24 @@ The Pixhawk® V6X is ideal for corporate research labs, academic research and co
 
     ![Pixhawk V6X](../../assets/flight_controller/cuav_pixhawk_v6x/core.png)
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+FMU Outputs:
+
+- Outputs 1-6 support [DShot](../peripherals/dshot.md).
+- Outputs 7-8 do not support DShot.
+- Outputs 1-6 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 8 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer5)
+- Outputs 5-6 in group2 (Timer4)
+- Outputs 7-8 in group3 (Timer12)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 Order from [CUAV](https://store.cuav.net/).
diff --git a/docs/en/flight_controller/cuav_x25-evo.md b/docs/en/flight_controller/cuav_x25-evo.md
index c5a11b3886be..88121e871d71 100644
--- a/docs/en/flight_controller/cuav_x25-evo.md
+++ b/docs/en/flight_controller/cuav_x25-evo.md
@@ -107,6 +107,23 @@ The [X25 EVO Wiring Quick Start](../assembly/quick_start_cuav_x25_evo.md) provid
 
 ![CUAV X25 EVO Pinout](../../assets/flight_controller/cuav_x25-evo/x25_evo_pinouts.jpg)
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (MAIN).
+
+Outputs:
+
+- Outputs 1-8 support [DShot](../peripherals/dshot.md).
+- Outputs 1-7 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+- Output 8 supports Bidirectional DShot output only (no eRPM capture).
+
+The 8 outputs are in 2 groups:
+
+- Outputs 1-4 in group1 (Timer5)
+- Outputs 5-8 in group2 (Timer4)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Serial Port Mapping
 
 | UART   | Device     | Port          |
@@ -121,22 +138,18 @@ The [X25 EVO Wiring Quick Start](../assembly/quick_start_cuav_x25_evo.md) provid
 
 ## PWM Outputs {#pwm_outputs}
 
-This flight controller supports up to 16 FMU PWM outputs (MAIN).
+This flight controller supports up to 8 FMU PWM outputs (MAIN).
 
 Outputs:
 
 - Outputs 1-8 support [DShot](../peripherals/dshot.md).
-- Outputs 9-16 do not support DShot.
 - Outputs 1-7 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
 - Output 8 supports Bidirectional DShot output only (no eRPM capture).
 
-The 16 outputs are in 5 groups:
+The 8 outputs are in 2 groups:
 
 - Outputs 1-4 in group1 (Timer5)
 - Outputs 5-8 in group2 (Timer4)
-- Outputs 9-11 in group3 (Timer1)
-- Outputs 12-14 in group4 (Timer8)
-- Outputs 15-16 in group5 (Timer12)
 
 All outputs within the same group must use the same output protocol and rate.
 
diff --git a/docs/en/flight_controller/cuav_x25-super.md b/docs/en/flight_controller/cuav_x25-super.md
index 502db14c63c9..46ec8ab71da1 100644
--- a/docs/en/flight_controller/cuav_x25-super.md
+++ b/docs/en/flight_controller/cuav_x25-super.md
@@ -108,6 +108,23 @@ The [X25 SUPER Wiring Quick Start](../assembly/quick_start_cuav_x25_evo.md) prov
 ![CUAV X25-SUPER Pinout_01](../../assets/flight_controller/cuav_x25-super/x25-super_pinouts_01.png)
 ![CUAV X25-SUPER Pinout_02](../../assets/flight_controller/cuav_x25-super/x25-super_pinouts_02.png)
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (MAIN).
+
+Outputs:
+
+- Outputs 1-8 support [DShot](../peripherals/dshot.md).
+- Outputs 1-7 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+- Output 8 supports Bidirectional DShot output only (no eRPM capture).
+
+The 8 outputs are in 2 groups:
+
+- Outputs 1-4 in group1 (Timer5)
+- Outputs 5-8 in group2 (Timer4)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Serial Port Mapping
 
 | UART   | Device     | Port          |
diff --git a/docs/en/flight_controller/cuav_x7.md b/docs/en/flight_controller/cuav_x7.md
index 8eb0b07db374..9e0dacd1ac57 100644
--- a/docs/en/flight_controller/cuav_x7.md
+++ b/docs/en/flight_controller/cuav_x7.md
@@ -5,3 +5,23 @@
 
 DOC REMOVED: 202603
 -->
+
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 14 FMU PWM outputs (MAIN).
+
+Outputs:
+
+- Outputs 1-12 support [DShot](../peripherals/dshot.md).
+- Outputs 13-14 do not support DShot.
+- Outputs 1-7, 9-12 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+- Output 8 supports Bidirectional DShot output only (no eRPM capture).
+
+The 14 outputs are in 4 groups:
+
+- Outputs 1-4 in group1 (Timer5)
+- Outputs 5-8 in group2 (Timer4)
+- Outputs 9-12 in group3 (Timer1)
+- Outputs 13-14 in group4 (Timer12)
+
+All outputs within the same group must use the same output protocol and rate.
diff --git a/docs/en/flight_controller/cubepilot_cube_orange.md b/docs/en/flight_controller/cubepilot_cube_orange.md
index e379a5422ce4..875a823f8cb7 100644
--- a/docs/en/flight_controller/cubepilot_cube_orange.md
+++ b/docs/en/flight_controller/cubepilot_cube_orange.md
@@ -40,6 +40,19 @@ This flight controller is [manufacturer supported](../flight_controller/autopilo
 - High-power, multi-tone piezo audio indicator
 - microSD card for high-rate logging over extended periods of time
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 6 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+All FMU outputs support [DShot](../peripherals/dshot.md) and [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 6 outputs are in 2 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-6 in group2 (Timer4)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 - [Reseller list](https://www.cubepilot.com/#/reseller/list)
diff --git a/docs/en/flight_controller/cubepilot_cube_orangeplus.md b/docs/en/flight_controller/cubepilot_cube_orangeplus.md
index ec1e50ed92c3..84f97a8e881c 100644
--- a/docs/en/flight_controller/cubepilot_cube_orangeplus.md
+++ b/docs/en/flight_controller/cubepilot_cube_orangeplus.md
@@ -41,6 +41,19 @@ This flight controller is [manufacturer supported](../flight_controller/autopilo
 - High-power, multi-tone piezo audio indicator
 - microSD card for high-rate logging over extended periods of time
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 6 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+All FMU outputs support [DShot](../peripherals/dshot.md) and [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 6 outputs are in 2 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-6 in group2 (Timer4)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 - [Reseller list](https://www.cubepilot.com/#/reseller/list)
diff --git a/docs/en/flight_controller/cubepilot_cube_yellow.md b/docs/en/flight_controller/cubepilot_cube_yellow.md
index 938e8fa9cc2d..2d8503a6251f 100644
--- a/docs/en/flight_controller/cubepilot_cube_yellow.md
+++ b/docs/en/flight_controller/cubepilot_cube_yellow.md
@@ -36,6 +36,19 @@ This flight controller is [manufacturer supported](../flight_controller/autopilo
 - High-power, multi-tone piezo audio indicator
 - microSD card for high-rate logging over extended periods of time
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 6 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+[DShot](../peripherals/dshot.md) is not supported.
+
+The 6 outputs are in 2 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-6 in group2 (Timer4)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 - [Reseller list](https://www.cubepilot.com/#/reseller/list)
diff --git a/docs/en/flight_controller/durandal.md b/docs/en/flight_controller/durandal.md
index 6d4f1980141d..0d38abfc7939 100644
--- a/docs/en/flight_controller/durandal.md
+++ b/docs/en/flight_controller/durandal.md
@@ -86,6 +86,19 @@ This flight controller is [manufacturer supported](../flight_controller/autopilo
 
 For more information see: [Durandal Technical Data Sheet](https://cdn.shopify.com/s/files/1/0604/5905/7341/files/Durandal_technical_data_sheet_90f8875d-8035-4632-a936-a0d178062077.pdf).
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 5 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+All FMU outputs support [DShot](../peripherals/dshot.md) and [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 5 outputs are in 2 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Output 5 in group2 (Timer4)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 Order from [Holybro](https://holybro.com/products/durandal).
diff --git a/docs/en/flight_controller/gearup_airbrainh743.md b/docs/en/flight_controller/gearup_airbrainh743.md
index 0fe295acae9c..5426e3f56635 100644
--- a/docs/en/flight_controller/gearup_airbrainh743.md
+++ b/docs/en/flight_controller/gearup_airbrainh743.md
@@ -70,6 +70,25 @@ Current UART configuration:
 Before PX4 firmware can be installed, the _PX4 bootloader_ must be flashed.
 Download the [gearup_airbrainh743_bootloader.bin](https://github.com/PX4/PX4-Autopilot/blob/main/boards/gearup/airbrainh743/extras/gearup_airbrainh743_bootloader.bin) bootloader binary and read [this page](../advanced_config/bootloader_update_from_betaflight.md) for flashing instructions.
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 9 FMU PWM outputs (MAIN).
+
+Outputs:
+
+- Outputs 1-8 support [DShot](../peripherals/dshot.md).
+- Output 9 does not support DShot.
+- Outputs 1-8 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 9 outputs are in 4 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-6 in group2 (Timer3)
+- Outputs 7-8 in group3 (Timer2)
+- Output 9 in group4 (Timer5)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Building Firmware
 
 To [build PX4](../dev_setup/building_px4.md) for this target:
diff --git a/docs/en/flight_controller/holybro_pix32_v5.md b/docs/en/flight_controller/holybro_pix32_v5.md
index e3c2acaf5f69..5a258ebd1602 100644
--- a/docs/en/flight_controller/holybro_pix32_v5.md
+++ b/docs/en/flight_controller/holybro_pix32_v5.md
@@ -71,6 +71,20 @@ This flight controller is [manufacturer supported](../flight_controller/autopilo
 
 Additional information can be found in the [Pix32 V5 Technical Data Sheet](https://cdn.shopify.com/s/files/1/0604/5905/7341/files/Holybro_PIX32-V5_technical_data_sheet_v1.1.pdf).
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+[DShot](../peripherals/dshot.md) is not supported.
+
+The 8 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-6 in group2 (Timer4)
+- Outputs 7-8 in group3 (Timer12)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 Order from [Holybro website](https://holybro.com/products/pix32-v5).
diff --git a/docs/en/flight_controller/kakutef7.md b/docs/en/flight_controller/kakutef7.md
index 72e2f77c5018..d467aa8411b3 100644
--- a/docs/en/flight_controller/kakutef7.md
+++ b/docs/en/flight_controller/kakutef7.md
@@ -5,3 +5,18 @@
 
 DOC REMOVED: 202603
 -->
+
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 6 FMU PWM outputs (MAIN).
+
+[DShot](../peripherals/dshot.md) is not supported.
+
+The 6 outputs are in 4 groups:
+
+- Outputs 1-2 in group1 (Timer3)
+- Outputs 3-4 in group2 (Timer1)
+- Output 5 in group3 (Timer8)
+- Output 6 in group4 (Timer5)
+
+All outputs within the same group must use the same output protocol and rate.
diff --git a/docs/en/flight_controller/kakuteh7-wing.md b/docs/en/flight_controller/kakuteh7-wing.md
index ccf07f6e7d00..2b9d084fcb7d 100644
--- a/docs/en/flight_controller/kakuteh7-wing.md
+++ b/docs/en/flight_controller/kakuteh7-wing.md
@@ -13,6 +13,28 @@ The [Holybro Kakute H743 Wing](https://holybro.com/products/kakute-h743-wing) is
 This flight controller is [manufacturer supported](../flight_controller/autopilot_manufacturer_supported.md).
 :::
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 14 FMU PWM outputs (MAIN).
+
+Outputs:
+
+- Outputs 1-8, 11-14 support [DShot](../peripherals/dshot.md).
+- Outputs 9-10 do not support DShot.
+- Outputs 1-5, 7-8, 11-14 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+- Output 6 supports Bidirectional DShot output only (no eRPM capture).
+
+The 14 outputs are in 6 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-6 in group2 (Timer4)
+- Outputs 7-8 in group3 (Timer5)
+- Outputs 9-10 in group4 (Timer15)
+- Outputs 11-13 in group5 (Timer3)
+- Output 14 in group6 (Timer2)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 The board can be bought from one of the following shops (for example):
diff --git a/docs/en/flight_controller/kakuteh7.md b/docs/en/flight_controller/kakuteh7.md
index c2cd252a2b57..65e3800bc8da 100644
--- a/docs/en/flight_controller/kakuteh7.md
+++ b/docs/en/flight_controller/kakuteh7.md
@@ -36,6 +36,21 @@ This flight controller is [manufacturer supported](../flight_controller/autopilo
 - Dimensions: 35x35mm
 - Weight: 8g
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (MAIN).
+
+All outputs support [DShot](../peripherals/dshot.md) and [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 8 outputs are in 4 groups:
+
+- Outputs 1-2 in group1 (Timer3)
+- Outputs 3-4 in group2 (Timer2)
+- Outputs 5-6 in group3 (Timer5)
+- Outputs 7-8 in group4 (Timer8)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 The board can be bought from one of the following shops (for example):
diff --git a/docs/en/flight_controller/kakuteh7mini.md b/docs/en/flight_controller/kakuteh7mini.md
index 8d9f1d505463..d60e5cbfdc37 100644
--- a/docs/en/flight_controller/kakuteh7mini.md
+++ b/docs/en/flight_controller/kakuteh7mini.md
@@ -40,6 +40,21 @@ PX4 runs on the H7 mini v1.3 and later.
 - Dimensions: 30x31x6mm
 - Weight: 5.5g
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (MAIN).
+
+All outputs support [DShot](../peripherals/dshot.md) and [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 8 outputs are in 4 groups:
+
+- Outputs 1-2 in group1 (Timer3)
+- Outputs 3-4 in group2 (Timer2)
+- Outputs 5-6 in group3 (Timer5)
+- Outputs 7-8 in group4 (Timer8)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 The board can be bought from one of the following shops (for example):
diff --git a/docs/en/flight_controller/kakuteh7v2.md b/docs/en/flight_controller/kakuteh7v2.md
index 0c2ff5ea4e60..a3321bf7b483 100644
--- a/docs/en/flight_controller/kakuteh7v2.md
+++ b/docs/en/flight_controller/kakuteh7v2.md
@@ -36,6 +36,21 @@ This flight controller is [manufacturer supported](../flight_controller/autopilo
 - Dimensions: 35x35mm
 - Weight: 8g
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (MAIN).
+
+All outputs support [DShot](../peripherals/dshot.md) and [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 8 outputs are in 4 groups:
+
+- Outputs 1-2 in group1 (Timer3)
+- Outputs 3-4 in group2 (Timer2)
+- Outputs 5-6 in group3 (Timer5)
+- Outputs 7-8 in group4 (Timer8)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 The board can be bought from one of the following shops (for example):
diff --git a/docs/en/flight_controller/micoair743-lite.md b/docs/en/flight_controller/micoair743-lite.md
index d1c334f63162..bfbedf2d6a52 100644
--- a/docs/en/flight_controller/micoair743-lite.md
+++ b/docs/en/flight_controller/micoair743-lite.md
@@ -67,6 +67,26 @@ This flight controller is [manufacturer supported](../flight_controller/autopilo
 
 ![MicoAir743-Lite Size](../../assets/flight_controller/micoair743_lite/size.png)
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 14 FMU PWM outputs (MAIN).
+
+Outputs:
+
+- Outputs 1-8, 11-12 support [DShot](../peripherals/dshot.md).
+- Outputs 9-10, 13-14 do not support DShot.
+- Outputs 1-8, 11-12 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 14 outputs are in 5 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-8 in group2 (Timer3)
+- Outputs 11-12 in group3 (Timer4)
+- Outputs 13-14 in group4 (Timer12)
+- Outputs 9-10 in group5 (Timer15)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 Order from [MicoAir Tech Store](https://store.micoair.com/product/micoair743-lite/).
diff --git a/docs/en/flight_controller/mindpx.md b/docs/en/flight_controller/mindpx.md
index 38692371b6e3..9c4de27310ce 100644
--- a/docs/en/flight_controller/mindpx.md
+++ b/docs/en/flight_controller/mindpx.md
@@ -104,6 +104,19 @@ And the max BAUD rate is the same as for the PX4 family, which is up to 921600.
 The user guide is [here](http://mindpx.net/assets/accessories/UserGuide9.18_2_pdf.pdf).
 :::
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (MAIN).
+
+[DShot](../peripherals/dshot.md) is not supported.
+
+The 8 outputs are in 2 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-8 in group2 (Timer4)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 MindRacer is available at [AirMind Store](https://airmind.mindpx.net/catalog).
diff --git a/docs/en/flight_controller/modalai_fc_v1.md b/docs/en/flight_controller/modalai_fc_v1.md
index c7729f854a61..6b3265626221 100644
--- a/docs/en/flight_controller/modalai_fc_v1.md
+++ b/docs/en/flight_controller/modalai_fc_v1.md
@@ -5,3 +5,16 @@
 
 DOC REMOVED: 202603
 -->
+
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (MAIN).
+
+[DShot](../peripherals/dshot.md) is not supported.
+
+The 8 outputs are in 2 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-8 in group2 (Timer4)
+
+All outputs within the same group must use the same output protocol and rate.
diff --git a/docs/en/flight_controller/mro_control_zero_f7.md b/docs/en/flight_controller/mro_control_zero_f7.md
index d40d8882a0e0..b92ba66dc0cd 100644
--- a/docs/en/flight_controller/mro_control_zero_f7.md
+++ b/docs/en/flight_controller/mro_control_zero_f7.md
@@ -56,6 +56,20 @@ This flight controller is [manufacturer supported](../flight_controller/autopilo
 - Power System:
   - 3x Ultra low noise LDO voltage regulator
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (MAIN).
+
+[DShot](../peripherals/dshot.md) is not supported.
+
+The 8 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-6 in group2 (Timer4)
+- Outputs 7-8 in group3 (Timer8)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 - [mRo Control Zero](https://store.mrobotics.io/mRo-Control-Zero-F7-p/mro-ctrl-zero-f7.htm)
diff --git a/docs/en/flight_controller/mro_x2.1.md b/docs/en/flight_controller/mro_x2.1.md
index 1be40508d7d0..eb175b58c82e 100644
--- a/docs/en/flight_controller/mro_x2.1.md
+++ b/docs/en/flight_controller/mro_x2.1.md
@@ -8,3 +8,16 @@ Doc removed 202603
 
 Note: Got ports using https://github.com/PX4/PX4-user_guide/pull/672#issuecomment-598198434
 -->
+
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 6 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+[DShot](../peripherals/dshot.md) is not supported.
+
+The 6 outputs are in 2 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-6 in group2 (Timer4)
+
+All outputs within the same group must use the same output protocol and rate.
diff --git a/docs/en/flight_controller/nxp_mr_vmu_rt1176.md b/docs/en/flight_controller/nxp_mr_vmu_rt1176.md
index 3b4e7ff027ed..dc46ea0f8590 100644
--- a/docs/en/flight_controller/nxp_mr_vmu_rt1176.md
+++ b/docs/en/flight_controller/nxp_mr_vmu_rt1176.md
@@ -133,6 +133,23 @@ Similar variants will be available from our licensees.
 - Other Characteristics:
   - Operating & storage temperature: -40 ~ 85°c
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 6 FMU PWM outputs (MAIN).
+
+Outputs:
+
+- Outputs 1-3, 5-6 support [DShot](../peripherals/dshot.md).
+- Output 4 does not support DShot.
+- Outputs 1-3, 5-6 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 6 outputs are in 2 groups:
+
+- Outputs 1-4 in group1 (PWM2)
+- Outputs 5-6 in group2 (PWM4)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 Order from [NXP](https://www.nxp.com).
diff --git a/docs/en/flight_controller/nxp_rddrone_fmuk66.md b/docs/en/flight_controller/nxp_rddrone_fmuk66.md
index b57415577c78..f062685f89fa 100644
--- a/docs/en/flight_controller/nxp_rddrone_fmuk66.md
+++ b/docs/en/flight_controller/nxp_rddrone_fmuk66.md
@@ -5,3 +5,16 @@
 
 DOC REMOVED: 202603
 -->
+
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 6 FMU PWM outputs (MAIN).
+
+[DShot](../peripherals/dshot.md) is not supported.
+
+The 6 outputs are in 2 groups:
+
+- Outputs 1-4 in group1 (FTM0)
+- Outputs 5-6 in group2 (FTM3)
+
+All outputs within the same group must use the same output protocol and rate.
diff --git a/docs/en/flight_controller/omnibus_f4_sd.md b/docs/en/flight_controller/omnibus_f4_sd.md
index b7d37a2db252..2c21598fa129 100644
--- a/docs/en/flight_controller/omnibus_f4_sd.md
+++ b/docs/en/flight_controller/omnibus_f4_sd.md
@@ -5,3 +5,16 @@
 
 DOC REMOVED: 202603
 -->
+
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 4 FMU PWM outputs (MAIN).
+
+[DShot](../peripherals/dshot.md) is not supported.
+
+The 4 outputs are in 2 groups:
+
+- Outputs 1-2 in group1 (Timer3)
+- Outputs 3-4 in group2 (Timer2)
+
+All outputs within the same group must use the same output protocol and rate.
diff --git a/docs/en/flight_controller/pixhawk-2.md b/docs/en/flight_controller/pixhawk-2.md
index 810ac51f6565..d236022e0069 100644
--- a/docs/en/flight_controller/pixhawk-2.md
+++ b/docs/en/flight_controller/pixhawk-2.md
@@ -47,6 +47,19 @@ This autopilot is [supported](../flight_controller/autopilot_pixhawk_standard.md
 - High-power, multi-tone piezo audio indicator
 - microSD card for high-rate logging over extended periods of time
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 6 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+[DShot](../peripherals/dshot.md) is not supported.
+
+The 6 outputs are in 2 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-6 in group2 (Timer4)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 [Cube Black](https://www.cubepilot.com/#/reseller/list) (Reseller list)
diff --git a/docs/en/flight_controller/pixhawk.md b/docs/en/flight_controller/pixhawk.md
index c8bd92ee3355..e3f3edc4969f 100644
--- a/docs/en/flight_controller/pixhawk.md
+++ b/docs/en/flight_controller/pixhawk.md
@@ -4,3 +4,16 @@
 # 3DR Pixhawk 1 Flight Controller (Discontinued)
 Doc removed 202604
 -->
+
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 6 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+[DShot](../peripherals/dshot.md) is not supported.
+
+The 6 outputs are in 2 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-6 in group2 (Timer4)
+
+All outputs within the same group must use the same output protocol and rate.
diff --git a/docs/en/flight_controller/pixhawk3_pro.md b/docs/en/flight_controller/pixhawk3_pro.md
index deaacad9ac22..0b8d11415530 100644
--- a/docs/en/flight_controller/pixhawk3_pro.md
+++ b/docs/en/flight_controller/pixhawk3_pro.md
@@ -5,3 +5,16 @@
 
 DOC REMOVED: 202603
 -->
+
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 6 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+[DShot](../peripherals/dshot.md) is not supported.
+
+The 6 outputs are in 2 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-6 in group2 (Timer4)
+
+All outputs within the same group must use the same output protocol and rate.
diff --git a/docs/en/flight_controller/pixhawk4.md b/docs/en/flight_controller/pixhawk4.md
index ec1dcfcebd8b..b4e4db7d6007 100644
--- a/docs/en/flight_controller/pixhawk4.md
+++ b/docs/en/flight_controller/pixhawk4.md
@@ -51,6 +51,20 @@ This autopilot is [supported](../flight_controller/autopilot_pixhawk_standard.md
 
 Additional information can be found in the [Pixhawk 4 Technical Data Sheet](https://github.com/PX4/PX4-Autopilot/blob/main/docs/assets/flight_controller/pixhawk4/pixhawk4_technical_data_sheet.pdf).
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+[DShot](../peripherals/dshot.md) is not supported.
+
+The 8 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-6 in group2 (Timer4)
+- Outputs 7-8 in group3 (Timer12)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 Order from [Holybro](https://holybro.com/products/pixhawk-4).
diff --git a/docs/en/flight_controller/pixhawk5x.md b/docs/en/flight_controller/pixhawk5x.md
index 8989739038d7..44f48c4f776c 100644
--- a/docs/en/flight_controller/pixhawk5x.md
+++ b/docs/en/flight_controller/pixhawk5x.md
@@ -111,6 +111,20 @@ The Pixhawk® 5X is perfect for developers at corporate research labs, startups,
 - Other Characteristics:
   - Operating & storage temperature: -40 ~ 85°c
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+[DShot](../peripherals/dshot.md) is not supported.
+
+The 8 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-6 in group2 (Timer4)
+- Outputs 7-8 in group3 (Timer12)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 Order from [Holybro](https://holybro.com/products/pixhawk-5x).
diff --git a/docs/en/flight_controller/pixhawk6c.md b/docs/en/flight_controller/pixhawk6c.md
index c928f7267929..6716b82cff01 100644
--- a/docs/en/flight_controller/pixhawk6c.md
+++ b/docs/en/flight_controller/pixhawk6c.md
@@ -88,6 +88,25 @@ The Pixhawk® 6C is perfect for developers at corporate research labs, startups,
 - Other Characteristics:
   - Operating & storage temperature: -40 ~ 85°c
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+FMU Outputs:
+
+- Outputs 1-6 support [DShot](../peripherals/dshot.md).
+- Outputs 7-8 do not support DShot.
+- Outputs 1-5 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+- Output 6 supports Bidirectional DShot output only (no eRPM capture).
+
+The 8 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-6 in group2 (Timer4)
+- Outputs 7-8 in group3 (Timer5)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 Order from [Holybro](https://holybro.com/products/pixhawk-6c).
diff --git a/docs/en/flight_controller/pixhawk6x-rt.md b/docs/en/flight_controller/pixhawk6x-rt.md
index bc9e868ad8a6..a6d89c9761a1 100644
--- a/docs/en/flight_controller/pixhawk6x-rt.md
+++ b/docs/en/flight_controller/pixhawk6x-rt.md
@@ -120,6 +120,25 @@ The Pixhawk®​ 6X-RT is perfect for developers at corporate research labs, sta
 - Other Characteristics:
   - Operating & storage temperature: -40 ~ 85°c
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 12 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+FMU Outputs:
+
+- Outputs 1-8 support [DShot](../peripherals/dshot.md).
+- Outputs 9-12 do not support DShot.
+- Outputs 1-8 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 12 outputs are in 4 groups:
+
+- Outputs 1-3 in group1 (PWM1)
+- Outputs 4-7 in group2 (PWM2)
+- Outputs 8-10 in group3 (PWM3)
+- Outputs 11-12 in group4 (PWM4)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 Order from [Holybro](https://holybro.com/products/pixhawk-6x-rt).
diff --git a/docs/en/flight_controller/pixhawk6x.md b/docs/en/flight_controller/pixhawk6x.md
index 52ed6a4c54e1..efc40868bcfc 100644
--- a/docs/en/flight_controller/pixhawk6x.md
+++ b/docs/en/flight_controller/pixhawk6x.md
@@ -150,6 +150,24 @@ The Pixhawk®​ 6X is perfect for developers at corporate research labs, startu
 - Other Characteristics:
   - Operating & storage temperature: -40 ~ 85°c
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+FMU Outputs:
+
+- Outputs 1-6 support [DShot](../peripherals/dshot.md).
+- Outputs 7-8 do not support DShot.
+- Outputs 1-6 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 8 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer5)
+- Outputs 5-6 in group2 (Timer4)
+- Outputs 7-8 in group3 (Timer12)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 Order from [Holybro](https://holybro.com/products/pixhawk-6x).
diff --git a/docs/en/flight_controller/pixhawk6x_pro.md b/docs/en/flight_controller/pixhawk6x_pro.md
index 6d6e94fd14a1..84732e457ddb 100644
--- a/docs/en/flight_controller/pixhawk6x_pro.md
+++ b/docs/en/flight_controller/pixhawk6x_pro.md
@@ -111,6 +111,24 @@ It can also be used with any other Pixhawk Autopilot Bus (PAB) specification-com
 
 :::
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (MAIN).
+
+Outputs:
+
+- Outputs 1-6 support [DShot](../peripherals/dshot.md).
+- Outputs 7-8 do not support DShot.
+- Outputs 1-6 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 8 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer5)
+- Outputs 5-6 in group2 (Timer4)
+- Outputs 7-8 in group3 (Timer12)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 Order from [Holybro](https://holybro.com/products/pixhawk-6x-pro).
diff --git a/docs/en/flight_controller/pixracer.md b/docs/en/flight_controller/pixracer.md
index 15d84aec8f18..662caad606e0 100644
--- a/docs/en/flight_controller/pixracer.md
+++ b/docs/en/flight_controller/pixracer.md
@@ -30,6 +30,20 @@ This autopilot is [supported](../flight_controller/autopilot_pixhawk_standard.md
 - OneShot PWM out (configurable)
 - Optional: Safety switch and buzzer
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (MAIN).
+
+All outputs support [DShot](../peripherals/dshot.md) and [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 8 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-6 in group2 (Timer4)
+- Outputs 7-8 in group3 (Timer8)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 Pixracer Pro is available from the [store.3dr.com](https://store.3dr.com/pixracer-pro/).
diff --git a/docs/en/flight_controller/radiolink_pix6.md b/docs/en/flight_controller/radiolink_pix6.md
index 0c5c0c73e5d5..0e8c431da8a7 100644
--- a/docs/en/flight_controller/radiolink_pix6.md
+++ b/docs/en/flight_controller/radiolink_pix6.md
@@ -48,6 +48,20 @@ This flight controller is [manufacturer supported](../flight_controller/autopilo
   - Weight 80g
   - Size 94mm x 51.5mm x 14.5mm
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+[DShot](../peripherals/dshot.md) is not supported.
+
+The 8 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-6 in group2 (Timer2)
+- Outputs 7-8 in group3 (Timer3)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 [Radiolink Amazon](https://www.radiolink.com.cn/pix6_where_to_buy)（International users）
diff --git a/docs/en/flight_controller/spracingh7extreme.md b/docs/en/flight_controller/spracingh7extreme.md
index 5ff8e7e69f80..17e021a1d9a2 100644
--- a/docs/en/flight_controller/spracingh7extreme.md
+++ b/docs/en/flight_controller/spracingh7extreme.md
@@ -72,6 +72,20 @@ This flight controller is [manufacturer supported](../flight_controller/autopilo
   - 36x36mm with 30.5\*30.5 mouting pattern, M4 holes.
   - Soft-mount M4 to M3 grommets supplied.
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (MAIN).
+
+All outputs support [DShot](../peripherals/dshot.md) and [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 8 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer5)
+- Outputs 5-6 in group2 (Timer4)
+- Outputs 7-8 in group3 (Timer8)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to Buy {#store}
 
 The SPRacingH7EXTREME is available from the [Seriously Pro shop](https://shop.seriouslypro.com/sp-racing-h7-extreme).
diff --git a/docs/en/flight_controller/svehicle_e2.md b/docs/en/flight_controller/svehicle_e2.md
index 0359df5a9ca7..ee671f271274 100644
--- a/docs/en/flight_controller/svehicle_e2.md
+++ b/docs/en/flight_controller/svehicle_e2.md
@@ -120,6 +120,45 @@ If any channel in a group uses DShot then all channels in the group need to use
 - Current Ratings:
   - TELEM1 and GPS2 combined output current limiter: 1.5A
   - All other port combined output current limiter: 1.5A
+<!-- pwm_outputs-proposed
+<!-- pwm_outputs-proposed
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+FMU Outputs:
+
+- Outputs 1-6 support [DShot](../peripherals/dshot.md).
+- Outputs 7-8 do not support DShot.
+- Outputs 1-6 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 8 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer5)
+- Outputs 5-6 in group2 (Timer4)
+- Outputs 7-8 in group3 (Timer12)
+
+All outputs within the same group must use the same output protocol and rate.
+-->
+
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 8 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+FMU Outputs:
+
+- Outputs 1-6 support [DShot](../peripherals/dshot.md).
+- Outputs 7-8 do not support DShot.
+- Outputs 1-6 support [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 8 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer5)
+- Outputs 5-6 in group2 (Timer4)
+- Outputs 7-8 in group3 (Timer12)
+
+All outputs within the same group must use the same output protocol and rate.
+-->
 
 ## Battery Monitoring
 
diff --git a/docs/en/flight_controller/thepeach_k1.md b/docs/en/flight_controller/thepeach_k1.md
index 5f9ab0b24609..dbaceb3ba811 100644
--- a/docs/en/flight_controller/thepeach_k1.md
+++ b/docs/en/flight_controller/thepeach_k1.md
@@ -96,6 +96,19 @@ To build PX4 for this target:
 make thepeach_k1_default
 ```
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 5 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+[DShot](../peripherals/dshot.md) is not supported.
+
+The 5 outputs are in 2 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Output 5 in group2 (Timer4)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to buy
 
 Order from [ThePeach](https://thepeach.shop/)
diff --git a/docs/en/flight_controller/thepeach_r1.md b/docs/en/flight_controller/thepeach_r1.md
index 6dbfc01264ce..22dcbca9f6d3 100644
--- a/docs/en/flight_controller/thepeach_r1.md
+++ b/docs/en/flight_controller/thepeach_r1.md
@@ -100,6 +100,19 @@ To build PX4 for this target:
 make thepeach_r1_default
 ```
 
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 6 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+[DShot](../peripherals/dshot.md) is not supported.
+
+The 6 outputs are in 2 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Outputs 5-6 in group2 (Timer4)
+
+All outputs within the same group must use the same output protocol and rate.
+
 ## Where to buy
 
 Order from [ThePeach](https://thepeach.shop/)
diff --git a/docs/en/flight_controller/x-mav_ap-h743r1.md b/docs/en/flight_controller/x-mav_ap-h743r1.md
index 3277f9b36662..6f59fdfaab9c 100644
--- a/docs/en/flight_controller/x-mav_ap-h743r1.md
+++ b/docs/en/flight_controller/x-mav_ap-h743r1.md
@@ -102,6 +102,37 @@ If any channel in a group uses DShot then all channels in the group need to use
   - Max input voltage: 5.4V
   - USB Power Input: 4.75\~5.25V
   - Servo Rail Input: 0\~9.9V
+<!-- pwm_outputs-proposed
+<!-- pwm_outputs-proposed
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 7 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+All FMU outputs support [DShot](../peripherals/dshot.md) and [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 7 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Output 7 in group2 (Timer2)
+- Outputs 5-6 in group3 (Timer3)
+
+All outputs within the same group must use the same output protocol and rate.
+-->
+
+## PWM Outputs {#pwm_outputs}
+
+This flight controller supports up to 7 FMU PWM outputs (AUX) and 8 IO PWM outputs (MAIN).
+
+All FMU outputs support [DShot](../peripherals/dshot.md) and [Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
+
+The 7 outputs are in 3 groups:
+
+- Outputs 1-4 in group1 (Timer1)
+- Output 7 in group2 (Timer2)
+- Outputs 5-6 in group3 (Timer3)
+
+All outputs within the same group must use the same output protocol and rate.
+-->
 
 ## Battery Monitoring