[DEVICE] ID-COOLING FX360 LCD

[Krummeltjie]

Device model

ID-COOLING FX360 (I know you mainly focus on Thermalrite, I respect it and just reaching out where possible to see if my AIO can be supported somwhere)

Diagnostic report
────────────────────────────────────────────────────────────
Version
────────────────────────────────────────────────────────────
trcc-linux: 9.3.4
Python: 3.12.3
Installed: pipx
Distro: Ubuntu 24.04.4 LTS
OS: Linux-6.17.0-14-generic-x86_64-with-glibc2.39
Kernel: 6.17.0-14-generic

────────────────────────────────────────────────────────────
lsusb (filtered)
────────────────────────────────────────────────────────────
(no Thermalright devices found)

────────────────────────────────────────────────────────────
udev rules (/etc/udev/rules.d/99-trcc-lcd.rules)
────────────────────────────────────────────────────────────
NOT INSTALLED — run: trcc setup-udev

────────────────────────────────────────────────────────────
SELinux
────────────────────────────────────────────────────────────
SELinux not installed

────────────────────────────────────────────────────────────
RAPL power sensors
────────────────────────────────────────────────────────────
intel-rapl:0: mode=400 NO ACCESS
intel-rapl:0:0: mode=400 NO ACCESS

────────────────────────────────────────────────────────────
Dependencies
────────────────────────────────────────────────────────────
PySide6: 6.11.0
pyusb: 1.3.1
hidapi: not installed

────────────────────────────────────────────────────────────
Detected devices
────────────────────────────────────────────────────────────
(none)

────────────────────────────────────────────────────────────
Device permissions
────────────────────────────────────────────────────────────
group plugdev: member
group dialout: NOT member
group disk: NOT member
group usb: (does not exist on this system)
/dev/sg0: mode=660 NO ACCESS

────────────────────────────────────────────────────────────
Handshakes
────────────────────────────────────────────────────────────
(no devices to handshake)

────────────────────────────────────────────────────────────
Config
────────────────────────────────────────────────────────────
path: /home/etienne/.trcc/config.json
devices: (none configured)

────────────────────────────────────────────────────────────
Installed themes
────────────────────────────────────────────────────────────
(no themes installed — download themes in the GUI)

────────────────────────────────────────────────────────────
Sensor availability
────────────────────────────────────────────────────────────
psutil: OK (cpu=1.7%)
psutil temps: ['nvme', 'k10temp', 'spd5118', 'amdgpu']
pynvml (NVIDIA): not installed (optional)
hwmon nodes: 7 (amdgpu, ucsi_source_psy_0_00081, k10temp, nvme, amdgpu, spd5118)

────────────────────────────────────────────────────────────
CPU baseline (last theme cache)
────────────────────────────────────────────────────────────
(not found — load a theme in the GUI first)

────────────────────────────────────────────────────────────
Recent log (last 50 lines)
────────────────────────────────────────────────────────────
2026-04-04 10:34:02 [DEBUG] trcc.adapters.system.linux.platform.create_setup: create_setup: creating LinuxSetup
2026-04-04 10:34:02 [DEBUG] trcc.cli._make_cli_renderer: Creating QApplication for CLI renderer (offscreen)
2026-04-04 10:34:02 [DEBUG] trcc.cli._make_cli_renderer: CLI renderer initialised: QtRenderer (offscreen)
2026-04-04 10:34:02 [INFO] trcc.cli.wrapper: CLI detect show_all=True
2026-04-04 10:34:02 [DEBUG] trcc.cli._device.detect: detect called show_all=True
2026-04-04 10:34:02 [DEBUG] trcc.adapters.system.linux.platform.create_detect_fn: create_detect_fn: building linux SCSI detect fn
2026-04-04 10:34:02 [DEBUG] trcc.adapters.system.linux.platform.create_setup: create_setup: creating LinuxSetup
2026-04-04 10:34:02 [INFO] trcc.adapters.device.detector._detect: Detected 0 device(s): none
2026-04-04 10:34:02 [DEBUG] trcc.cli._device.detect: detected 0 device(s)
2026-04-04 10:34:02 [INFO] trcc.cli.wrapper: CLI detect → 1
2026-04-04 10:37:51 [DEBUG] trcc.adapters.system.linux.platform.create_setup: create_setup: creating LinuxSetup
2026-04-04 10:37:51 [DEBUG] trcc.cli._make_cli_renderer: Creating QApplication for CLI renderer (offscreen)
2026-04-04 10:37:51 [DEBUG] trcc.cli._make_cli_renderer: CLI renderer initialised: QtRenderer (offscreen)
2026-04-04 10:37:51 [DEBUG] trcc.cli._system.report: collecting diagnostic report
2026-04-04 10:37:51 [DEBUG] trcc.adapters.system.linux.platform.create_setup: create_setup: creating LinuxSetup
2026-04-04 10:37:51 [DEBUG] trcc.core.platform.detect_install_method: install method: pipx
2026-04-04 10:37:51 [DEBUG] trcc.adapters.system.linux.platform.create_detect_fn: create_detect_fn: building linux SCSI detect fn
2026-04-04 10:37:51 [INFO] trcc.adapters.device.detector._detect: Detected 0 device(s): none

============================================================

TRCC Doctor — Ubuntu 24.04.4 LTS

[OK] Python 3.12.3

[OK] PySide6 6.11.0
[OK] numpy 2.4.4
[OK] psutil 7.2.2
[OK] pyusb 1.3.1
[--] hidapi not installed (optional)

[OK] AMD GPU (sensors via sysfs)

[OK] libusb-1.0
[OK] libxcb-cursor

[OK] sg_raw
[OK] 7z
[OK] ffmpeg

[MISSING] udev rules — run: trcc setup-udev

[--] RAPL power sensors not readable — run: trcc setup-udev

[--] polkit policy not installed (dmidecode needs sudo)
run: trcc setup (or sudo trcc setup-polkit)

Some required dependencies are missing.

Device capabilities

• [X ] LCD screen (displays images/themes)
• LED RGB lighting
• Both
• Not sure

Additional context

• Does this device work in Windows TRCC? I no longer have Windows, but I used to just install the software
• Bus 003 Device 007: ID 1a86:e317 QinHeng Electronics IDCOOL-C
• USB ID (run lsusb | grep -i 0416 or check Windows Device Manager)
• Photo of the device (optional, but helpful)
• https://www.idcooling.com/product/detail?id=566&name=FX360%20LCD

[Lexonight1]

Hey @BassRhombus — thanks for reaching out!

The ID-COOLING FX360 isn't in our device table yet, but if it has a Windows app that controls the LCD, we could potentially decompile it and reverse-engineer the protocol — that's exactly how TRCC-Linux was built for Thermalright devices.

A few questions:

1. Does the FX360 come with a Windows app for controlling the LCD? If so, what's it called and where did you download it?
2. Can you share the VID/PID? Run:

   lsusb

   and paste the full output — we need to see all USB devices, not just filtered ones.
3. What does the LCD display look like? Round? Square? Widescreen? Rough size in pixels if you know it.

If you can get us the Windows app, we can take a look at the protocol and see if it's feasible to support.

---

If this project helps you, consider buying me a beer 🍺 or Ko-fi ☕

[Lexonight1]

Hey @BassRhombus — just checking in. Were you able to get the VID:PID? Two ways to find it:

1. On Linux: lsusb — look for anything USB display/LCD related
2. On Windows: open Device Manager → USB devices → Properties → Details → Hardware IDs

Also, what software controls it on Windows? That helps us figure out the protocol.

---

If this project helps you, consider buying me a beer 🍺 or Ko-fi ☕

[Krummeltjie]

I am so sorry, I got so busy. I'll get that info for you by tomorrow. On Windows I am using the ID-Cooling software. Together with the info tomorrow, I'll send a link to their website as well

…

On Tue, 07 Apr 2026, 02:25 lexonight, ***@***.***> wrote: *Lexonight1* left a comment (Lexonight1/thermalright-trcc-linux#103) <#103 (comment)> Hey @BassRhombus <https://github.com/BassRhombus> — just checking in. Were you able to get the VID:PID? Two ways to find it: 1. On Linux: lsusb — look for anything USB display/LCD related 2. On Windows: open Device Manager → USB devices → Properties → Details → Hardware IDs Also, what software controls it on Windows? That helps us figure out the protocol. ------------------------------ If this project helps you, consider buying me a beer <https://buymeacoffee.com/Lexonight1> 🍺 or Ko-fi <https://ko-fi.com/lexonight1> ☕ — Reply to this email directly, view it on GitHub <#103 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BCMKF4VVY5ERGGPYSJD72S34URDIXAVCNFSM6AAAAACXMYSTD2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHM2DCOJVG4ZTGNZZG4> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[Krummeltjie]

Hi,

Sorry again about the delay.

LSUSB:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 0cf2:7750 ENE Technology, Inc. MS-ARGB
Bus 003 Device 003: ID 3434:d030 Keychron Keychron Link
Bus 003 Device 004: ID 1038:2232 SteelSeries ApS SteelSeries Arctis Nova 5
Bus 003 Device 005: ID 1038:1858 SteelSeries ApS SteelSeries Aerox 9 Wireless
Bus 003 Device 006: ID 0bda:b85b Realtek Semiconductor Corp. Bluetooth Radio
Bus 003 Device 007: ID 1a86:e317 QinHeng Electronics IDCOOL-C
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 0c45:636b Microdia Rapoo Camera
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

I think the biggest thing here is "Bus 003 Device 007: ID 1a86:e317 QinHeng Electronics IDCOOL-C"

And then below is the link to the website which contains a download tab:

https://www.idcooling.com/product/detail?id=566&name=FX360%20LCD

The display is a 1.48 inch round display (240 x 240 px)

[Krummeltjie]

I would upload the installation files, but exe is not supported

This is the direct link:

https://static.idcooling.com/link/20260104/ID-COOLING-Installer_qg9dcf.exe

[Lexonight1]

Hey @Krummeltjie — thanks for the link! I'll grab that installer tonight and decompile it to see how the FX360 protocol works. Currently knee-deep in debugging some other issues but this is on my list.

Sit tight — I'll get back to you with an update.

---

If this project helps you, consider buying me a beer 🍺 or Ko-fi ☕

[Krummeltjie]

No rush at all! I appreciate you taking a look at it!

…

On Thu, 09 Apr 2026, 16:02 lexonight, ***@***.***> wrote: *Lexonight1* left a comment (Lexonight1/thermalright-trcc-linux#103) <#103 (comment)> Hey @Krummeltjie <https://github.com/Krummeltjie> — thanks for the link! I'll grab that installer tonight and decompile it to see how the FX360 protocol works. Currently knee-deep in debugging some other issues but this is on my list. Sit tight — I'll get back to you with an update. ------------------------------ If this project helps you, consider buying me a beer <https://buymeacoffee.com/Lexonight1> 🍺 or Ko-fi <https://ko-fi.com/lexonight1> ☕ — Reply to this email directly, view it on GitHub <#103 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BCMKF4SIXKRMMMHPMMWVLRD4U6UODAVCNFSM6AAAAACXMYSTD2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHM2DEMJUHA2DEOJYHE> . You are receiving this because you were mentioned.Message ID: ***@***.***>